Summary: I have a Sweex Wireless LAN USB 2.0 Adapter 11G (54 Mbps) being used with a Belkin 802.11g Wireless DSL/Cable Gateway Router (54 Mbps), with a 700kbs ...
Summary: Strange one this (at least to me) :-) I have an intranet network with four PCs wired and a couple wireless. One PC recently lost its IP address (192....
Summary: I have a Time Warner cable modem connected directly to NIC. No router. I connect to the internet fine, but had a problem before. Periodically I run...
Summary: Hello, I have a setup at work on one of our manuf lines where there is a 3com wired nic that communicates with the assembly line, and a cisco wireless...
Summary: Hello, I've been having this problem for the past few days. Before that, I have had the same setup on my network here for 2 years and have never had ...
Summary: Ok, I have a belkin wireless cable/dsl router. I have several computers connected and the router randomly loses connection and requires restarting. I ...
Summary: What did ping 127.0.0.1 produce. That should work even without an IP address. The lack of anything else would indicate a configuration problem. Go...
Summary: Hey Gang, I'm usually a lurker - but i'm having a problem that's absolutely maddening that I just can't resolve. I've got -two- computers in a room ...
Summary: Hey vifa, I have this same exact problem, at least it sounds like it. I'd be interested to know if it was indeed the exact same issue. For me, if I'...
Summary: I have a Netgear 802.11g wireless router. I have it connected to one other computer via the Netgear USB adaptor. The workstation is able to use the ...
Summary: Hello, Im going to try and set up a wireless network at home. I have three pc's and im going to use a wireless router to connect all three together in...
Summary: I have had a dlink 614+ router for some time. Recently I started having connection problems to internet. My router gets internet address from cable ...
Summary: hey everyone i have a router hooked up to a corporate network t1 (dont worry its legal) and my internet connection keeps going down. i release and ref...
Summary: Yes on the PC with the USB modem you install a NIC and link this to the router, you then setup Internet Connection Sharing on this PC. As ICS acts as ...
Summary: OK, lets start from the begining. Plug your modem into the router (Internet or WAN port). Turn the modem and router on. The "online" light should appe...
Summary: Is there any way to force Win XP to use one NIC for internet Access, and Another for Lan access? I have the following set-up: Network Setup: Subnet 1 ...
Summary: My experience with doing this to an existing setup (inserting a BEFSR41 router into a Cable setup {Adelphia}) requires that you unplug power from the ...
Summary: most likly your ISP only permits a certain MAC address to connect to their network as an ISP client. Also the IP addresses (192.168.x.x) are private c...
Summary: I tried the software before I installed the hardware and also tried the software after the hardware. I think I will have to get different wireless car...
Summary: Here is the scenerio: Computer 1: Pentium IV Desktop Computer running Windows XP Professional and a Netgear DG814 Router to connect to the Internet. ...
Summary: I've got the exact same problem and unfortunately, no explanation for it. I've had my 614+ for over 2 years now and it was working great until about 4...
Summary: Hey Matt- Are you still loosing connection to the internet with the linksys? I was having a similar problem and may have found a solution last night....
Summary: Hi There, I have Netgear Router with built in ADSL modem(DG814) connected to a netgear wireless access point (WG602 v2). The system works perfectly, o...
Summary: I have 2 nic cards installed. one connects to my broadband service and the other (which is wireless)is used to share the connection (ICS) with my othe...
Summary: Hi ! I need to do a Router-to-Router VPN connection between two branch offices using Windows 2000 Server. I made an installation lab. I followed all t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
