Summary: I purchased a used Mustek III EP flatbed scanner. I hooked it up and then tried to install from the original disk. Going through settings, install n...
Summary: I am tryin to install my mustek 1200 ub plus scanner, and it's reading cable not connected when it is, i think maybe some files are missing from the i...
Summary: It is tricky but I did it. Download the newest XP drivers from this german site: http://www.mustek.de/eng_/html/trei... You will need the SN ofyour sc...
Summary: I recently installed a Mustek 1200 III EP scanner. I downloaded the driver and it is 3.1/95/98 compatible. Next I downloaded a trial version of Smar...
Summary: I installed a Mustek 1200 III EP scanner. Everything seems to load fine. When I try to test or scan I get a "Fatal Exception has occured . . ." mess...
Summary: My mother has an old Intel Pentium II that she bought in 1998. I would like to completely wipe out the hard drive (I can't even defragment because it ...
Summary: I jave a 52X48X52 CD RW/R internal drive (IDE) and installed a 36X CD Drive to use to play my games with as not to use my Writer for playing games. Pr...
Summary: first of, i have NEVER used linux and am completely new to it, so i apologise if i am sounding stupid! :) I am trying to install linux mandrake on my ...
Summary: My New Samsung 52-3252 CD RW is working like a CD ROM only. The Nero 5.5 during start of Installation gives error message of "The Configuration Data ...
Summary: just bought a western digital 120 gb hard drive. Its IDE/ATA100. doesnt want to install on any of my computers- tried 3 . I have tried master/slave p...
Summary: Hello all, I tried to install a Digital Research CDRW in my HP Pavillion PII 400 mhz computer but cannot get it to work. It appears to recognize the ...
Summary: Big problems here. I bought the GA-7VAXP and I am trying to install Win XP Pro. I have tried disabling everything in the BIOS as far as RAID, anythi...
Summary: Hi, I have just installed a new CD-Rewriter - it should be a dead easy procedure. I did it and then connected the power and all the cables again. Now ...
Summary: I bought 2 256 MB DDR-DIMMs PC3200. I have the MSI K7N2 D. When I install both Dimms the PC wont start. In the mobo manual there isn't any info about ...
Summary: Hi, When I am installing my Lexmark X1150 it keeps saying that I don't have my printer connected to my computer. I kow that I am sopposed to cancel ...
Summary: i wanted to get rid of my old hard drive and install a new one. i know i have to make some kind of boot disk and partition the new hard drive and stu...
Summary: Hi, I want to install a DVD-Writer, CD-Writer, and CD-Rom in my computer, How do i set their jumpers ,,, and which IDE Cables do i connect them to ......
Summary: I have an old NEC 6030H Versa Laptop that has Win 95 on it. I tried to put Win 98 on it so I can use a wireless network card in the PCMICA slot. Half ...
Summary: I am having a serios prob with my ol' dell laptop. It's a one-drive bay laptop which means there's only one bay for the 3.5" floppy drive and the CD-R...
Summary: I have an AMD Athlon 1800 I wish to install in place of my AMD 1500. It has a fan on top, square heatsink on a K7S5A Motherboard. It has a latch on th...
Summary: Hey there. I am in the process of installing my Ati/powercolor radeon 9200. I seem to have run into a bit of a problem. I follwed their instructions o...
Summary: Hi, I have an Asus A7V8X motherboard that has worked for some time properly. Recently the onboard lan, raid, and audio no longer work. I re-installed...
Summary: I am installing a new processor fan (onto my Athlon XP2800+)it is a Zalman CNPS7000B-Cu. I have removed the 'supplied with' heatsink and fan and the g...
Summary: Modem install problem I'm trying to put together a Compaq (0400h), Chipset : Intel i440BX/ZX, Processor : Intel Pentium III @ 498 MHz, 128 MB (2 x 64 ...
Summary: I bought 2 x 512MB DDR RAM and when I install it on my motherboard it only detects one stick, just 512MB. I know for sure they're not faulty and the s...