Summary: Ive just inherited a Shuttle AK38N mobo & XP2200+ Thoroughbred processor. The mobo bios is Phoenix ver. 6.00PG. I cant find where to set the multiplie...
Summary: I pushed up my FSB to 112, but still want more! I know how to unlock my duron, but my mobo doesn't allow multiplier changes! Bios update? Mobo change?...
Summary: the multipliers on Tbred are already unlocked. look at the L1 bridge on the cpu. should be connected already. if it is, then your board might not ...
Summary: I'm no overclocker (at the moment) but figure that those of you who are would be able and kind enough to make suggestions on how to deal with the iss...
Summary: I am trying to overclock my Athlon xp 1700 Tbred Revision B on my ecs board, but the manual multipliers only go to 12.5, the autodetect takes much hig...
Summary: Shuttle AK38N (KT333F) V1.1 Chipset: VIA KT333CF / VIA VT8235 System clock: 200/266/333 MHz Socket 462 (Socket A) CPU Support: AMD Athlon XP, Sempron...
Summary: Hi I was wondering if there is anyway to change the unlocked multiplier on an athlon 2400 with out doing it in your BIOS because my BIOS doesn't have ...
Summary: Your board "may" unlock the multiplier on the CPU..it depends on what CPU you have. If it does, you should be able to lower the multi & raise the FSB ...
Summary: Sure it will, but I wouldn't recommend getting that board. Not because it's bad, but you'd be much better off with a board based on the nForce2. Not ...
Summary: Actually it will help him out if he pumps the front side bus up high. PC2100 only rates to 133mhz fsb X 2= 266mhz memory clock speed. Buying PC2700 me...
Summary: ok the boys in hardware are giving me a hard time. Maybe the overclockers can help. I currently have a 1.7 AMD Palamino core. I set the jumpers on th...
Summary: I had no problem unlocking the multipliers on my XP1700 cpu,but was wondering on this XP2000 chip is it the same deal,just the L1 bridges? This is the...
Summary: Yeas. I got two questions. I'm building my first computer in my life. So here are my problems. 1st: Do I have to put a thermal paste on my Athlon 24...
Summary: I have an unlocked xp1600 and an msi 6380 (k7t266 pro2 ??) I have heard that this board is good for overclocking, but i don't see where the clock mult...
Summary: my system is currently overclocked to 1.96 GHz, pretty stable. thats just by adjusting the FSB though (about 144 i think.. not sure). i tried to tur...
Summary: Hi, when i change the multiplier on my mobo, the change isnt recognised in eitha my computer properties or everest. it just says its on 10X in everest...
Summary: Well, on the newer AMD chips, there is a multiplier on the top of the processor (the side without the pins). If you want a little thingy that can unlo...
Summary: I am about to unlock the multipliers on my 2100xp AMD-palomino chip by bridging the socket holes on 'AJ27' and 'AH26' using fine wire to gain access t...
Summary: hi, i´ve been looking around for ways to unlock my cpu, an amd palomino 2100+ but it seems its different than other xp´s apparently you need to change...
Summary: I have just upgraded my system by changing my aging Duron for an Athlon XP2400+. Since I have an old motherboard (Chaintech 7KJD) which only supports ...
Summary: I can't. The multiplier on my CPU is locked - which is generally the case with Intel CPUs. The only way I could do any testing would be to throttle ba...
Summary: Whether it will or won't show 266 depends on the program you are using but it is a semantic issue anyway. If you are showing an FSB of 133MHz right n...
Summary: The multipliers on the P3's and Celerons are locked so the selection of multipliers is meaningless. I've seen BX based boards run Celeron 1.2's, so lo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
