Summary: I've just purchased a shiny new gigabyte GA-5AA motherboard and can't (whatever the hell I do) get windows to detect any type of mouse- PS/2 or seria...
Summary: First question: are they not detected in Windows or not detected during startup >> Seems like a motherboard problem. What you can do it to clear the c...
Summary: Here's the deal. I had primary 6g and a primary slave 17gb and a 27gb. They were all working fine. I then wanted to switch-up and take the 6gb out a...
Summary: Yes, that was the reference to I/O settings - unfortunately there's not a lot of choice but if there was an IRQ conflict it would normally be detected...
Summary: My newer computer has been having problems and I was wanting to install its hd to my older computer in order to access the data on it. My older comput...
Summary: i have a similar problem. after installing aan extra h/drive my cd rom is not detected by windows at all. my two h/drives are on seperate ide cables a...
Summary: My CD-ROM drive is not detecting in windows 98. I have just formatted and installed windows 98 (same o/p on system before) and used my windows 98 CD t...
Summary: Sir, I have one PIII 700MHz with windows 2K & win98 installed system. Recently I encountered a problem that my mouse(ps/2) is not been detected. Bu...
Summary: I have a regular mouse which works on all other computers except mine. Win95 does not show a conflict in Device Manager. I have tried to have it detec...
Summary: What's up Everyone, I installed a GENIUS Wireless Smart Scroll mouse and a LOGITECH Cordless Keyboard on my ADT SONIC BOOK laptop to check it out be...
Summary: If your BIOS detects the hard drive then I don't think the problem is an incorrect jumper setting. Is the drive partitioned? Use fdisk from the comma...
Summary: Ok now try not to laugh to hard while reading this. A friend of mine gave me a old amd 66mhz system. The only thing i was going to do with it was use ...
Summary: I'm running Windows98 SE on a PII 400. I accidentally unplugged my PS/2 mouse from my computer while it was running and now everytime it boots up Wind...
Summary: Brian, the Toshiba cdrom is an ATAPI drive, and it shouldn't need any drivers to be recognised in Windows. Boot up with a Win 98 floppy with cdrom sup...
Summary: Using Logitech Wingman Attack, Aztech Sound galaxy washington 16 sound card + gameport, win98. Follows on from my earlier posting. --Joystick is liste...
Summary: I have a computer with windows 98 and when booting the hhd and cdrom are not detected by the bios and at the end it give "disk boot failure, insert sy...
Summary: My mouse is sometimes not detected when I restart (win98SE). If I totally turn the computer off, wait a minute and turn it back on the mouse is then ...
Summary: I need someones help , My ps/2 connections on my motherboard suddenly broke !!!! Luckily I had both a usb keyboard and mouse . The Usb ports worked fi...
Summary: Hi! I am using win98 and have a Rockwell 56.6Kbps modem. I have just reinstalled my Windows and in the process, my modem is not working. I got its dr...
Summary: Hi Mark It will say cd-rom boot failure if there is no boot disk in your cd-rom Change your BIOS to boot "A" "C" CD-ROM Go to MSCONFIG and choose Sel...
Summary: It's an old PC100 SIS530/5595 Super7 Mainboard with AMD K6/2 500 running. I'm sure this board has a total of 1024kB L2 Cache, there are two cache chip...
Summary: In an effort to correct some problem with an old machine, re-loaded windows from original disc. It detected a bad registry so it picked an older versi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
