Summary: Hi, I just bought the Intel Pentium II Jabil 440BX ATX Motherboard and this motherboard doesn't come with the manual book. Now, I'm having the probl...
Summary: I was looking for information on my motherboard, when I found a program which gave me all of my hardware information. It said that my mobo (motherboar...
Summary: To find out the top CPU speed of the motherboard, you either need the motherboard manual or to find the manufacturers site which should hold informati...
Summary: I am stumped. I have an IBM PC 365 duel processor pentium pro w/ windows 2000. Multi processor drivers are all installed but my bios is not detecting ...
Summary: I just got a Pentium processor for free, here's what information I have, copied right from the bare chip: Intel Pentium with MMX Technology FV80503166...
Summary: i also built with excatly the same mainboard, ram,cpu with. the mother board it will give you 3 beeps repeatedly if the ram have a problem or the ram ...
Summary: PS: I would also check your motherboard manual/vendor to see if SCSI is an option for booting. Every system I've seen made with a Phoenix or Award bio...
Summary: Suggest you find the motherboard cmos(bios) jumper and "Reset" the bios cmos (With the power OFF). Normally you just remove the jumper between pin 1 &...
Summary: Suggestion: go back to basics. Disconnect the burner, CD and modem, set BIOS back to failsafe and boot up. Read the motherboard manual thoroughly. The...
Summary: well since ur com is beeping long tones before starting this shows a bug with hardware. Each type of beep has a special meaning and is useful in detec...
Summary: I have P3 800 PC with 128 MB RAM, 20 Meg HD. The motherboard is GA-6VXE7+. The PC is assembled. I am having problems while upgrading the RAM (trying t...
Summary: It's also possible that your motherboard can't recognize more than 128 MB in a single slot. If this is the case then to achieve 256 MB you'll need two...
Summary: I am trying to install Win 2000. I get to the copying files and it stops at 17% and gives me an error message saying it can't copy the file and asks ...
Summary: Your computer bios is finding something different in the hardware config in your setup and more than likely you have Update (in the bios) set to No or...
Summary: when i start up my computer i get the message bad command or file name in config.sys esssolo line 1. i have an on board esssolo audio. i have been tol...
Summary: Yo muska, one of my computers is: Celeron 300@450MHz,mb:M729 ram:64MB + 128 MB both pc100 so I suggest u to do the following: 1.check your motherboar...
Summary: What u need to do is, since ur mobo is a a year or more old, chances are that on that motherboard there is a blue block of dip switches, these switche...
Summary: If none of the above seemed to work for you (which seems to happen alot in Win2k) then try this: Take the cover off your PC and locate the CMOS jumper...
Summary: Are the memory sticks the same speed (i.e. 133 vs 100.) Does the slot in the machine support that stick? Did you look at the motherboard manual to m...
Summary: I have been through a similar ordeal with a 1.2 Ghz Athlon 266 FSB on the same motherboard. Here are my suggestions: 1) Check that your cpu is really...
Summary: the ram definitely does need to match the other two sticks that are in there...consult your motherboard manual to find out what type of ram it is...if...
Summary: Another question for hardware pros... In my motherboard manual (Shuttle AK31), it indicates that the PCI Bus Master IDE Controller Onboard supports "8...
Summary: Check your motherboard manual about which slots you can and can't use when the raid controller is in use. There is a list of which slots share IRQ wit...
Summary: you bet you have problems with that ram buddy.Particulary, i have no problems with manufactures of DIMMs or motherboards parts. I used a clone to ins...
Summary: Check your Motherboard Manual. You may be able to disable the current password by applying jumpers to selected motherboard points momentarily. You c...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
