Summary: I would like to know if it is possible to branch off the primary Linksys Router hooked to the cable modem with another router (linksys) to in effect c...
Summary: I us pcanywhere now to logon to a pc on a local network and view numbers that constantly change on the screen. The problem is it only allows 1 pc at ...
Summary: Hi. Having a problem with hosting more than 10 players on a Tribes 1 server. I use a router with 2 computers networked (one for the server, one for pe...
Summary: Hi, I just switched from DSL to Cable internet since my new place is too far for DSL. Can I still use the Westell 327w router on the cable modem feed?...
Summary: How can I connect more than 1 pc to the cable modem without the cable company knowing about it? I have a 10Mb intel hub, do I need a switch/router? In...
Summary: I currently have successfully got ICS working fine, having sorted out my firewall problems. There is one thing though, the PC that is the ICS Gateway ...
Summary: when you share files, it's shared to whatever network you're currently connected on. computers can be set to use up to two networks. Just go to "netw...
Summary: If you want to put more than 1 computer on your connection you need the router , this will perform natting which allows you to connect multiple com...
Summary: You all claim to say so but I say prove it. Use ethereal on your so called switch and report back. You can put more than one IP on an adapter. ...
Summary: To use more than one router you can split the address range up, excluding the routers IP of course. Example: router 1=192.168.0.1=gateway router 2=192...
Summary: Hub sends data to all pcs Switch sends data to 1 pc Most routers have switches built in. Routers make you act like an isp. Routers take 1 ip address a...
Summary: I have a cable broadband connection with Telewest which is Blueyonder. I shared this between more than 1 PC in the house using the Belking F5D7230-4 r...
Summary: If you turn off the router the PC can't see the high-speed modem. If you have more than 1 PC connected the same goes for them. You could remove the ro...
Summary: i have a cable modem connection which uses only one static ip address configured to be used in pc-A. i have a second computer (pc-b) which needs inter...
Summary: Hi, I'm hoping someone can help me with this scenario, which in general (with out the AD issue) would typically be common in a network with more than ...
Summary: Hello everyone. I hope someone knows an easy solution to this. We have a remote office with 2 employees. At their old location we had a leased line. N...
Summary: I have two routers. (1) wireless linksys (2) hardwire netgear. I have been trying to setup my network to work with both of these routers on the same ...
Summary: Your friends are correct. Current Wireless Routers work at 2.4 GHz. That is the same frequency that some cordless phones work (Though many cordless ...
Summary: A Local Area Network (LAN) is a client-server relationship between clients and (usually) a DHCP (Dynamic Host Communication Protocol) server. The DHC...
Summary: Hey tonysathre, thanks for that reply. I'm not sure what firmware I'm using. It's a Belkin router. If possible, I was hoping to use those AutoIT sc...
Summary: Hi I am getting cable internet next week and i want to set up a wireless network so that a laptop and either one or 2 desktops can share the connectio...
Summary: Well I don't really need the hub, but I noticed the Router is a mess on my network. I don't have the cable connection yet though, so maybe that's why...
Summary: Can you ping your gateway? Can you ping the other pc's. If your running dhcp on your router you don't need the primary dns, in fact you don't need t...
Summary: Hi techie types, Ok maybee im missing somethink again, but here we go just the same. I have 2 computers on a home network,they are conected with just ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
