Summary: I have recently downloaded a very old DOS game from an abandonware site called Premier Manager 1. Here's the problem, the game needs a minimum of 580 ...
Summary: IMO, yes (as previously noted), QEMM is excellent, but the tools provided by M$ are already installed For most folks (mortal or not), on most systems,...
Summary: They probably wants EMS/XMS and more free conventional memory. Make sure you have lines that links to himem.sys and emm386.exe in your config.sys, an...
Summary: I have an error from a DOS program (DOS 6.22, no Windows or other OS) that I've just installed that says "Not Enough Memory to Continue - Available d...
Summary: is there a way to free up more conventional memory when using ms lanmanager 2.2c or ms networking client 3.0 to connect to an nt domain using dos 6.22...
Summary: Ok... look, it's IMPossible to have the full 640K free under normal circumstances - the OS requires something to run on, after all. Usually 600 to 61...
Summary: It is possible to manually do some of the changes which Memmaker does. You need to edit autoexec.bat and config.sys. Take backup copies and have a Boo...
Summary: To increase conventional mem in DOS config.sys device=c:\windows\himem.sys device=c:\windows\emm386.exe noems dos=high,umb autoexec.bat lh c:\windows...
Summary: Yeah - I realised this morning that you might get LESS conventional memory - specifying RAM to get EMS memory. This sets up a 64K page frame in upper ...
Summary: Been wondering. 1. Has there been any attempt to increase drastically or remove DOS memory limitations. 2. Are there any simple programs that flush th...
Summary: You can try running "MEMMAKER" in DOS mode. This (may) rearrange TSR loading to free up more conventional memory. Running the game under windows is no...
Summary: [yes, post your CONFIG.SYS and AUTOEXEC.BAT, it will help] There about two things that you can do, depending on how many drivers and TSRs you need loa...
Summary: I got a classic games CD the other day, but the main game I wanted to play will not work. If I try it in windows or from the command prompt, I just ge...
Summary: Are you sure your DOS programs are in short of memory or they call for extended memory? First of all Emm386.exe is an Expanded (not extended!) memory ...
Summary: Thanks for the advice I tryed , but sadly when I remove the RAM entry and replace with ON my conventional memory is not enough to play the game (571K)...
Summary: I have a P4 system installed with DOS 6.22 and attached with Netware 4.11 server. I can't run BANK MASTER software as i have only 522KB of conventiona...
Summary: read! eXtended Memory Specification (XMS), ver 3.0 January 1991 Copyright (c) 1988, Microsoft Corporation, Lotus Development Corporation, Intel Corpor...
Summary: I'm trying to run a game and I have no idea what to do to my config.sys file. It looks like this: no keys------------ REM [Header] @ECHO OFF ...
Summary: Used QEMM7x quite a bit (years ago) and was able to boot up with only 6K of conventional mem used. It works differently than traditional DOS, but, of...
Summary: well thanks for the "support so far"; i have some additional info for more help; yes i went through online help on dos memory management (though i rem...
Summary: I have a Tandy 486, and I crashed it, but I can't get it back up and running. When I boot it up it comes up with a message that reads "non system disk...
Summary: First of all: Extended memory and XMS are not the same. Extended memory is the physical memory above 1 MB, accessed through interrupt 15h. The base me...
Summary: What version of Windows? Dos can be a bit tricky under ME (I've heard), possibly need a boot disk. Otherwise, might need to adjust your DOS memory set...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
