Summary: Hi, I just go a Precision software Reef 386sx motherboard, and it won't see more than 1 mb. ram it has an AMI 386sx BIOS (s/n 046105) an intel i386sx ...
Summary: My daughter's generic P-750, worked fine w/XP but we needed to go back to W98 due to a networked virus protection license. Anyhow, I loaded '98 just ...
Summary: "Tried removing Ram chip but still no beep." If you are certain everything is connected correctly, including a speaker or speakers that allow you to h...
Summary: Hi, I have a NF-7s with a Barton 2500 and a stick of Kingston 512 mb ram for a couple of months now. The GFX card i have currently is Gainward 5900xt...
Summary: It's either defective RAM, it's not installed properly, or it's a density issue. If it's the density issue, the 128MB stick would either be recognized...
Summary: I just bought a used computer with the AK12 mobo, and at first it did OK, but now won't boot at all. Had intermittent problems with power switch on f...
Summary: I have a microstar mainboard 440 bx, and it won't take more than 32m of ram tried 15 different types pc 100, and 133 and and this has really puzzled m...
Summary: Trying to install a Maxtor D740x 580 gb hard drive in an Asus P2L97 motherboard. Updated to the latest bios (1009) so it now sees the hard drive (it ...
Summary: Dear All Free RAM (168-pin, Dual-Banked, Compaq, SDRAM, 133hz - think the description was DIMM-ALL, which I don't really understand) to anyone can sol...
Summary: I've tried both channels. It's really strange...I can hook the drive to another computer and it sees the drive fine. Even my BIO sees it...it just w...
Summary: Isn't the Compaq LTE 25 a 386 laptop? Or are we talking about a different computer? A 386 bios isn't going to recognize a 1 gig drive. Also, isn't ...
Summary: The laptop is an older Inspiron 2500 Celeron. I took out the old 5GB HDD and have been trying to replace it with a new Western Digital Scorpio 40GB. ...
Summary: If anything, it's the power supply. Simply checking the voltages is useless, unless you also have a way of checking amperage? And you won't get a disp...
Summary: I have a really strange problem. I have an ECS K7S5A motherboard and a Maxtor 40Gb IDE HD. My case and power supply is by Antec. My hard drive work...
Summary: Assuming you have the new hard drive jumpered and connected correctly, and your bios settings are correct for that drive position (e.g. Auto, by the m...
Summary: John, adding a 2nd drive is one of the easiest things to do. It's a good place to start learning about your computer. I will assume that your first d...
Summary: My buddy has a new computer, never out of the box, but about a year old. It has a Gigabyte GA6WMMC7 motherboard, 64Mb RAM, onboard sound and video, P...
Summary: http://www.asus.com/products/mb/socketa/a7v8x-x/overview.htm If this is the board it won't have a four pin connector so that's something you don't nee...
Summary: Your 128mb stick is "high density" RAM...your board supports "low density" RAM only. It will onlt recognize 50% of it's capacity...there's nothing you...
Summary: Most likely a compatibility issue with the RAM and your MB. It happens all the time. See if you MB manufacturer has a BIOS update to correct this prob...
Summary: I reinstalled windows xp on my system (ECS k7s5a mobo, 256 MB RAM, a 60 and 40 GB hard drive) and now the USB ports on the front of my case don't work...
Summary: Ok, I cleared the CMOS setting by switching the pin on the MOBO. Then turned on the PC, same problem occurred. I couldn't remove the sound card and m...
Summary: I assembling my new computer but it won't power on, just a flicker from the fans then nothing. When you punch the power button the first time (each t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
