Summary: Ok, I need help..I installed a VGA Cooler which has nothing to do w. my CPU, then I restarted and it was reading a Athlon XP 1500+, when infact I have...
Summary: its always run that hot in summer I got a thermaltake Xaser III case, 2 intake at the front, 1 intake on side, 2 exhaust at rear, 1 exhaust on top, PS...
Summary: right now my system has a K6-2/500 in it. it can support a K6-2/550 so i bought one. after installing it, applications closed/crashed unexpectedly a...
Summary: i bought a AMD AthlonXP 2400 Tbrd 2.0Ghz 266 and when i put my new computer together it came up as a AMD AthlonXP 1800 15.Ghz. at first i thought the ...
Summary: The voltage for your CPU should be printed right on top...of course, it's under the heatsink now...lol! But you can always do a search to find the pro...
Summary: Hi. Re-enter CPU Settings in the CMOS Setup. How do I do that, I need help. Bios are Phoenix Award Bios v6.00 PG. Motherboard is Syntax P4S865PE. Tha...
Summary: Several days ago I got a message when booting up that my CPU settings had changed. Pressing f1 continued the start-up and nothing seemed out of the o...
Summary: having used both Intel and AMD I'd say that in MY usage AMD were faster.Yes they run a little hotter but nothing that a few extra fans and a good heat...
Summary: If your mobo is reading the cpu diode, you are fine. The diode temp is 10C or more above the cpu socket temp. Check this forum with a search on your...
Summary: I had one of those boards for a couple of years & had no probs...those are basically the settings I used. You do NOT need the CPU setting at aggressiv...
Summary: I have an ECS mobo with Athlon XP 1800 (1.5Ghz), my CPU temparature reads 90 C, without any crashes or anything, when I overclocked it to 1.8Ghz, It j...
Summary: The only stable setting I seem to be able to get with my cpu and mobo (MSI KT3V series) is when the FSB-150MHz and Ratio-11.5. This should result in ...
Summary: im currently having a problem upgrading my cpu.. here are all the specs from powerleap upgradething Model : Compaq Deskpro EN Series Chassis Type : Mi...
Summary: I'm having a problem getting my PC running at the proper speeds. PC Specs: Mobo: ECS L7S7A2 Mobo Proc: AMD 2500+ Barton RAM: Dane-Elec 184 Pin 512MB D...
Summary: Looks like that mobo will only support faster CPU's with locked multipliers, had you bought a 2200+ with the Palomino core you probably would have bee...
Summary: Well my cpu will not boot up. I have gotten into windows on a few occassions. Cause it had told me my cmos battery was low. Now I have changed that, a...
Summary: I recently bought a 2100+ and then 2 days later decided to buy an A7N8X motherboard as well. Since i've changed motherboards, my cpu is only being det...
Summary: CPU Temp is the most frequent question in any forum. Billion dollars industry thanks to the question “ Is my CPU running too hot?” Motherboard compa...
Summary: Hello! I have been going crazy the past couple weeks trying to drive my CPU temp down. This all started when I was playing GTA Vice City for a coupl...
Summary: Check here http://www.amdboard.com/amdid.html to make sure your cpu is the 266fsb version of the 2600+. I think you might have the 333fsb. I have no...
Summary: I doubt your computer will not start up because of overheating. Something is not seated properly or something in the BIOS is not configured properly....
Summary: Are you sure that the power supplies work properly? Usually the BIOS has an option to automatically power off if the temperature exceeds a certain lim...
Summary: Hi i just bought a new mobo, ram and processor: AMD 'barton' XP 2600+ 333FSB 512k L2 cache Asus A7N8X v.2 mobo (support for 400 FSB Barton) Northbridg...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
