Summary: I have successfully overclocked my proccessor w/ CPUFSB (couldn't do BIOS because the computer is an HP - stupid proprietary crap!). I raised the FSB...
Summary: Yes well it does get loud.. I have a p4.. oc to 3.5x ghz.. stable without to bad heat problems. (6 case fans, 2 fans on power supply, 2 fans on video ...
Summary: I've also seen people blow their $200 gfx card up from too high a bus speed on AGP. Don't be stupid when you OC when PCI and AGP get overclocked, too...
Summary: ok first of all my spec - amd 2400+, Gigabyte GA-7vrxp, geforce3 ti200, 550W psu. Im trying to overclock my pc but i cannot get bus speed past 145 -...
Summary: I'm working on a computer for someone and it has these specs. Asus A8R-MVP, socket 939, ATI crossfire AMD X2 3800, overclocked to 2.4GHz. 2GB of dual ...
Summary: Frequency = bus speed Your 3000+ either runs at 166mhz (333DDR) or 200mhz (400DDR)...sounds like you have the 166mhz/333DDR version DRAM frequency is ...
Summary: Does anyone have this mobo and can overclock the BUS. There is nothing in th BIOS to change the BUS speed (unless I missed something the 15+ times I c...
Summary: I'm no overclocker (at the moment) but figure that those of you who are would be able and kind enough to make suggestions on how to deal with the iss...
Summary: hi i have a dell dimension 4300 with a 1.6 p4 in it, i was wounderin how to overclock it i also have a amd xp 2200 overclocked at 3000 wich was very e...
Summary: Sup i have 1.8A myself. I am running 2.3Ghz stable @1.6 Vcore. The reason for your computer locking up might be this: When u speeded up the fsb - your...
Summary: i tried that but it wont tell my bus speed. just tells me the stuff i already know about my processor. gateway wont tell me anything about my motherbo...
Summary: Hello Please take a look at This screenshot I have Geforce 2 MX400 According to SIS SANDRA my AGP bus speed is too high. It's 89MHz. I looked in user ...
Summary: i know that a pentium 4 has a quad pumped bus speed. my ddr memory has a rating of 400mhz, but my bios only says it has 200mhz. what is up with this, ...
Summary: I have a Giga-byte GA-7VRXP KT333 Motherboard and an AMD Athlon 1700. Two questions, first, I have the motherboard set at the default bus speed of 1...
Summary: IS YOUR BUS SPEED SUPOSE TO CHANGE WHEN YOU CHANGE CPU SPEED I HAVE A AMD 475 MHZ IT WAS RUNNING AT 300MHZ GOT IT TO CHANGE TO 482 BUT MY BUS SPEED CH...
Summary: Hi, I'm trying to configure my new computer. I have ASUS-A7V333 mobo with Athlon XP 2000+ on it and I just installed 512Mb stick of Corsair XMS PC2700...
Summary: "so doing anything more than setting it to what its supposed to be wont help because i need faster ram?" I didn't say that exactly. 1st of all, your F...
Summary: Zroc's post (link below) on hardforum.com is the mother of all amd vs p4 vs varying fsb benchmarks. Many review sites have cut & pasted from his post...
Summary: I realize you've been struggling with this for days now & I really wish someone could come up with a solution for you...you (we) must be missing somet...
Summary: Hey Guys i'm new. Wanting to get a laptop. Is there much diff b/w bus speeds of 400mhz and 533mhz, in terms of performance? I know 533 is better, i ...
Summary: Ok, I ran the performance wizard in Sisoftware Sandra, and it gave me these problems: "Warning W2541 - FSB exceeds chipset rated FSB. If you’re over c...
Summary: Skip brings up a good point. The last number in the timing (tRAS) can affect how high the memory bus speed can be run. Generally, the tRAS number *sho...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
