Summary: Ok, guys, you all have helped me out of 2 fixes. Learning to format and take ME off of my Compaq and now dual booting with ME/XP 2nd on my old clon...
Summary: My system refuses to boot when my 12Gb maxtor HD is connected to my Promise Ultra 66 PCI IDE controller card. I have another much older drive which co...
Summary: Hello,I'm going to purchase a 20G Maxtor hdd to replace my other two hard drives/6.4G Fugitsu & 2G Quantum.I'm running win98se/200Mhz>mmx/128m ram/I h...
Summary: My machine was having 4.3 g.b hard disk.I put another 15 g.b maxtor hard disk as a secondary hard drive from Compusa.2 motnhs it worked perfectly.Then...
Summary: Thought everyone would like this also if u have a Maxtor stubborn hard drive: Incorrect jumper settings on the drive If the Master / Slave jumper con...
Summary: Has anyone had a problem with Maxtor and Win98 that when starting up the operating system isn't found and the only way to correct it is to run the Ma...
Summary: just installed a maxtor 20 gig hard drive and while I was setting it up, the piece of paper said that there is two pieces of plastic(jumpers) for jump...
Summary: Just recently install a new Maxtor 80gb hard drive to replace an old 4.3. Used Maxtor CD to boot to and copy everything to the larger drive which was...
Summary: I had the Maxtor Ultra ATA card running fine with three hard drives (C, D & E) attached to it for quite a while. Do to other issues I had to reformat...
Summary: I have a Maxtor 83500D4 hard drive well thats it's serial number anyway, it has a capacity of 3,339Mb. I have been having problems with it for a while...
Summary: I am looking at the Maxtor 20gb ATA100 7200rpm (p/n 52049H4) and the IBM 15gb ATA100 7200rpm (p/n DTLA-307015). What do you think? PS The Maxtor is on...
Summary: I installed a maxtor 40.0 gig hdd as slave in a win 98 S.E., with 266 mmx cpu and 160 mb of Ram. The maxtor shows 40.0 gig in BIOS, but windows only s...
Summary: I have a Maxtor external drive(USB)5400 RPM with 40GB memory. It works fine for a few hours then it suddenly quits working. That is, cannot copy or pa...
Summary: I tried all the suggestion from everyone here and followed all the procedures on the Maxtor web site with no sucess on the hard drive being detected. ...
Summary: OK, so I got ths gateway 2000 pc at the flea market. It was previously a p133 but I had an old p200 chip lying around si I put that in. I had a caviar...
Summary: Ok, I'm cross eyed with confusion now, so its time to ask for help again. My motherboard has ATA/66 support. I have a Maxtor ATA100 40 gig hard dri...
Summary: I just bought a 20 gig. HD.(maxtor)I used the maxtor software to install it.I started from scatch and reloaded windows.Everything went fine untill I i...
Summary: I'm having *major* problems with this. The symptom is that the system locks up completely to the extent that both keyboard and mouse stop responding. ...
Summary: if you go to maxtor's website they have a utility like i described in the previos posts that will get your computer to recognize the whole 6.4. believ...
Summary: HI:A friend Of mine Bought a new 80Gig HDD Maxtor and he Installed into his system ,but the HDD it doesn,t show up during the "Post" We checked the Ca...
Summary: I found this 20 gig maxtor hd & when i hooked it up i saw that my sys. recognized its size but the #-s were veird like ;19-60-40.... so after it boot...
Summary: hi! i thinking of buy a samsung sv2001h drive, but i have no experience of that brand so my question is; is there any quality difference between the ...
Summary: I installed a new 1394 card and an external Maxtor hard drive on my Windows 98+ IBM aptiva 400 Mhz computer. I screwed up the initial setup and now th...
Summary: I've bought a Maxtor 40Gb drive recently and had some problems insatlling it. The Bios could not detect the drive, so I tried cilinder limitation jump...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
