Summary: I do daily 3-d rendering using Bryce 5, which generates files anywhere from a few megs to hundreds of megs each. I have blown up my THIRD hard disk i...
Summary: I'm getting a problem auto detecting my hard disk when starting up my PC. It will only detect on a warm boot (and after a long pause !). Also my Offi...
Summary: Hi, I can see my 20 GB Hard disk in BIOS, and Device manager list properly in Windows 2000 Pro. but can not see it in "Disk Management" at all. so obv...
Summary: Hi, I have purchase 160 GB Hard Disk of Maxter brand.My system is 1GHz with 256 MB Ram.The problem is in BIOS it shows 137GB but durning instal...
Summary: Hi guys, I spent a big part of last night trying to figure out how to boot to a hard disk. It was all in vain. So I turn for help. I found an old hard...
Summary: I have recently installed a second hard disk in my computer,(Seagate Barracuda 7200.7 internal 3.5",160GB). I would,however,like to copy the entire co...
Summary: yesterday i was defragmenting my D drive and i tried to open winamp (yeah i know it's stupid but i was bored). When i opened it my computer crashed an...
Summary: How to Assign Multiple Hard Disk's in a single drive: I have 3 Hard disk in my computer and each hard disk capacity is 40 GB. I want to merge these 3 ...
Summary: I've using a single hard disk 40G with size capacity which running my windows XP SP2 system. Recently I installed another hard disk 20G with size capa...
Summary: I don't understand. It can't be that ALL 3 of my IBM hard disks wont' work. I've tried running it as an external hard disk and reformatting the entire...
Summary: THanks everyone. I will burn the image to DVD. ALthough I would love it if someone can help create a boot floppy that can access the usb hard disk f...
Summary: I recently bought a western digital hard caviar harddisk with a capacity of 100 gb and 7200rpm. I wanted to put it in the HP vectra p3 system that I ...
Summary: Hi, I had posted earlier on this forum about the front portion of my computer getting unusually hot. I have pinned this problem down to my 160GB ata h...
Summary: I am having usb 1.0 but the drive is 2.0. But vendor says it works with both 1.0 and 2.0.With 1.0 it works at lower speeds. When i connect it says new...
Summary: You need to make sure that the hard disk is properly installed and configured and that it is seen and properly recognised in the BIOS. Is this by chan...
Summary: Thanks again, actually I have not intended to access the BIOS haveing any setting, but I just wonder why my exisitng IDE Hard Disk were found when the...
Summary: Dear friend, I have a 40 GB Fujitsu hard disk which was earlier present internally within my IBM Laptop.Around a year back, I replaced my Laptop with ...
Summary: I have a 250gb western digital hard drive, in an external enclosure ( basically combo box etc) my system is sony vaio, 1.73 ghz, centrinio, 1 gb ram i...
Summary: Hi everyone, I am trying to install Win 98SE on an old computer. I boot from the A drive, and start the computer with CD Support. I can switch to my ...
Summary: its a maxtor diamon max plus 8 ,40 GB 7200 rpms ata 133 which was working perfecly for months until now, since i ran norton speed disk from utilities ...
Summary: jam has probably identified what your problem is. If the Windows XP CD you are using to run Setup with does not have SP1 or SP2 updates included, Set...
Summary: Hello, I could use some help on the arcane subject of Master/Slave settings. Basically I want to dual boot my system into either Win 98 or XP PRO. ...
Summary: I have a damaged Maxtor 4R080J9 80gb hard disk. One morning a few days ago, I turned the computer on and the main partition was unreadable ("Drive is ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
