Summary: I have a quick question as a newbie about networking that I was hoping someone might be able to help out with. I have recently upgraded my service wi...
Summary: Get rid of all Static IP's but one. You didn't mention what type of router your using but I would recommend the Linksys BEFSR41. Configure the router ...
Summary: Let me toss in my 2 cents worth... The guys above are correct, set your server NIC to a static IP of whatever you want...your Linksys will DEFAULT it'...
Summary: Hi. We have a Westell B-90 210014 supplied by our ISP, CenturyTel, and we bought a pack of 5 static IP's. From inside the building, on our side of the...
Summary: I have 14 pc's in a internet cafe of which 1 is the server, I have opted for two ISP's so as if one isp goes down I can immediately switchover to anot...
Summary: We have recently got DSL. We have 5 static IP addresses. The provider had me setup an addhost to the router which give me a 192.168.254.1-5. Now our n...
Summary: Stuart, Not trying to be rude, but that didn't much answer my question. I do not want to share an account from two different places. I would like to k...
Summary: I have a script I wrote in UNIX that will go and ping all IP's in a certain subnet. If you have any UNIX/Linux experience, I'd be happy to share it w...
Summary: We have recently had DSL installed. We have a static IP network with about 30 nodes. We use and email server and a fax server. At this time we are usi...
Summary: Hi, I have been having a nightmare with what should be a very simple task, any suggestions would be greatly appreciated. I have two pc's running Windo...
Summary: I'd like to be able to run two routers on the same LAN. Here's why: I'm running a five computer LAN through a wireless 8.011b (BEFW11S4) Linksys rou...
Summary: hey, i have never been able to host games and do ftp servers etc. cause i have a router w/ a firewall. people tell me i have to do static ip or someth...
Summary: OK, I'm having some network issues, and i'd like to get some feedback on some potential solutions - computer 1,2,3 are connected together via an S...
Summary: Hello guys, We have an ADSL Internet access with 5 static IP addresses provided by the ISP, LinkSys 4 port router connecting the LAN to the Internet. ...
Summary: if your referring to the router's page for setting up your static ip go to www.linksys.com/support if its in your computer follow this: right click my...
Summary: I suppose you could via a batchfile if you used the netsh command. A simpler method would be to use DHCP and change all clients to get their IP's aut...
Summary: You know it hero......however, a lot depends on your environment. Where I'm working, everything is static. There is no DHCP except on the WLAN. Thi...
Summary: Basically i'm just after some advice. This is fairly long, so I will greatly appreciate all replies. my setup: I have a cable modem plugged into a lin...
Summary: I have a DSL line with 5 static IPs, and i'm trying to hook up all the computers in my household to it through a router. (NetworkAnywhere NR041) Unfor...
Summary: " some routers have dhcp servers that include static ip's." This is referred to as a "reserved" address not to be confused with a static addresses. A...
Summary: Hi Our DSL provider gave us 5 static IPs for the office. We would like to use one for our Netgear router, that all the office computers connect to, an...
Summary: I need to determine the IP address of a Flexwatch 3400 video server for a client. The server was setup and running. They had to disconnect it for othe...
Summary: What I'd like to do is have each of the 4 pc's on my network have a static IP. Each of these will go through a Linksys router to a cable modem and on...
Summary: The question is, why would you bother wanderer? That's a lot of extra work when you can simply leave your static IP's out of the DHCP scope altogethe...
Summary: First off I want to say that Verizon Business DSL cannot properly support WESTELL Routers and WESTELL will NOT support these routers either as noted i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
