Summary: Hopefully someone knows the answer to this one...i have a Mitsumi Cr-4801 TE CDR drive. I am trying to update the drivers with the firmware for it so...
Summary: A 486 probably does not have auto detect. Enter the BIOS usually by pressing the DEL key as you boot and see what the drive parameters are and w...
Summary: Last night I was cleaning out some old, duplicated files and shut down. This morning I rebooted, my IBM 486sx ran through the POST and got to "startin...
Summary: I have an old pc that I am trying to load with ms-dos or dos (don't know the difference),network and use as a back up for files. I have win-98 and a ...
Summary: MS-DOS only recognizes the first 1024 cylinders of an HDD. So even if your system's BIOS can accept values greater than that this limitation is still ...
Summary: I was given this computer by a friend because it would not recognize the hard drive he installed. I tried also and it wouldn't so I took it to a profe...
Summary: I am trying to create a CDROM Boot disk that will reformat the hard drive, install DR-dos(which i have on the floppy), and install other software on t...
Summary: The reason is 6.22 won't work for those people in need of 6.0 is that 6.22 seems to be a sort of upgrade. It will not setup. The information in thi...
Summary: Boy are you mixed up. First off. You are in MS-DOS not MS-DOS Mode. since I take it you are useing MS-DOS 6.22 or earler? If you type WIN at the DOS P...
Summary: Could someone please help me out here, my old NEC 486 hard disk is without a operating system. I found a free disk operating system from www.bootdisk...
Summary: Hi, I'm trying to play a dos game but my cd dvd drive is not recognized in dos. I get the error "no cd". I know I'm supposed to put code in autoexec....
Summary: Hello, I have some old games I still enjoy playing that required you to exit windows and boot the game via DOS. Well, for some reason, the CD-ROM is ...
Summary: MS-DOS 6.22 does not recognize the FAT32 file system. To use all of the 4.2 GB HDD in MS-DOS 6.22, you must create 2 extended partitions slong with t...
Summary: Name: N/A Date: May 05, 2001 at 22:19:26 Pacific Subject: Can I have 6 Floppy Disk Drives in DOS?? Comment: I've got DOS 5.0 and I'm reading my Use...
Summary: I have an NEC CD-ROM drive. While the drive itself operates flawlessly within Windows mode, it does not operate within MS-DOS mode. I have reinstalled...
Summary: Microsoft® Word for Windows™ ® Version: 6.0 Product Support Services Subject: How to Optimize the Performance of Word 6.0 Application Note 5/94 * ...
Summary: I've been trying to get at least a DOS prompt on a friends computer, but am stuck at a message saying: The MS-DOS setup was not completed Insert the U...
Summary: No. No operating System. I'm trying to install Windows. When I run FDisk, it says "no fixed drives present". A:\>fdisk gives me "no fixed disks pre...
Summary: Hey Guys! I am having an problem. I reformatted my CPU's hard drive, and when I started it up again, it said This file is missing or corrupted... I go...
Summary: I've got DOS 5.0 and I'm reading my User Guide, in the Customizing you system, and it says I can add up to 4 floppy drives more than what my bios repo...
Summary: I have a Sonora computer bought in 95 and it has about 545mg 32mb ram. 90mhz.When the list of things that come up for computer what is on it It only h...
Summary: I have a Sony Vaio with a PCGA-CDRW51 CD drive attached via a PCMCIA card, and I would like to use Ghost to clone my PC onto CDs, however, when I go i...
Summary: First off... I am useing a Compaq Presario - Win 98 I have 287 mb of ram in memory My computer seems to be running in MS-dos compatability mode. Intel...
Summary: Hey, this happens a lot - don't feel bad. What you've got to do is make sure that you're system BIOS recognizes your drive as being there. When you bo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
