Summary: I have a wiring problem! I’ve installed one of these boards in a new case and have no clue to where the connectors of the case go on the MS-6541 v1...
Summary: Can anyone tell me where I can find a K7TM Pro Version 5.0(MS-6340 v5.0) motherboard? I have been looking all over for it and I can't find the thing. ...
Summary: I currently have a problem... I've recently built an MSI KM2M v1.0 motherboard, 256mb DDR PC-2100 ram, duron 1.6ghz chip and xp pro. I noticed that t...
Summary: Hi All, I have a new ECS P4ITA v1.0 motherboard (info printed on mb). I want to flash the BIOS before I start installing WinXP. I went to the ECS web...
Summary: I need to flash or update my bios. Award Bootlock V1.0 2000 cmoss checksum error.Software must be on floppy.I can't get past this screen and did every...
Summary: hello, nothing is wrong i just have a question for all users.i recently instaled a ms-6340 v1 in a old buld it yourself tower i bought for 1 dollar....
Summary: I have upgraded a Medion MS-6385 version 1 motherboard with two pairs of KVR800X18/128 PC800 RIMM cards (total 512mb) as recommended by the manufactur...
Summary: i have a problem, accept its the AGP port thats the prob,I have a k7sem v1.0 motherboard it detects the agp card and assigns it an irq alright and i ...
Summary: simple question. will a geforce 6800 AGP video card work on a SOYO SY-P4I865PE Plus V1.0 motherboard? P3 866/256/133 socket 370 Asus CUV4XC Geforce ...
Summary: Obviously, if the ram works in other mboards there's nothing wrong with it - it is just not compatible with YOUR mboard. Ram that works in another mbo...
Summary: Thanks for this!! Which bits in particular need to be looked at? heres the motherboard... nvidia n-force-6a61bmcc-00 msi k7n2 delta-L (MS-657OG) bus t...
Summary: I am currently upgrading the RAM on a MS-6280e ver 1.0 board and am a bit mystified as to what the brown bus connector is next to the PCI slots....any...
Summary: Hey people sorry to bother you again, I have got this Old computer up and running and I have been working on it to get it to run smoothly. I mainly us...
Summary: I bought my puter almost three years ago and have upgraded various bits since then. However the CPU is now starting to show its age. It runs at the ma...
Summary: "Basically complete opposite of each other" Huh? "The PCIe Base 2.0 specification supports both 2.5GT/s and 5GT/s signaling rates, in order to retain ...
Summary: Just thought I would provide an update. I've just tried booting up without the soundcard, nic, and pctv. Still have the problem. I tried using memo...
Summary: Tony, If you want my advice, don't change the motheboard. The Soyo-P4I865PE Plus Dragon2 v1.0 is a great motherboard. It fully supports the Prescott p...
Summary: Anybody have a copy of the right manual and cd for a Gigabyte GA-7DX rev 3.0 motherboard ? Could sure use copies, have lost mine. The Gigabyte site do...
Summary: PreservedSwine - "Any AGP 3.0 card will work in any AGP 2.0 compliant mobo" firelance - "While AGP 3.0 spec uses existing AGP 2.0 and AGP Pro 1.5v co...
Summary: I have a MSI MS-6570(v1.X) ATX Mainboard that is supposed to support up to 3gb of ram. The computer operates fine on (1)1gb stick of ram but when I in...
Summary: Yah, looks ok, you don't need the @echo off, that is for you to not seeing the command line during boot up, but you are not able to see anything in th...
Summary: Hi I just purchased WG302 Wireless Access Point and wanting to upgrade the firmware. It's currently v1.0.5. To upgrade the firmware, I have to connect...
Summary: i have a problem withmy MS intellimouse 4.0, th scroll wheel in games scrolls toooo fast....i set the speed in the intellimouse options for vertical s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
