Summary: I want to use my Lucent Orinoco Wireless Card under MS- DOS. But I don't know how. Did anyone get this working? I'm having this problem, but I've got ...
Summary: I've been tinkering around with my refurb'd Compaq Armada M300 (no CD-ROM). I was going to load up win98 onto it by means of using the network throug...
Summary: I am trying to locate the PC Card Director for DOS v 4.07. A thorough search of the IBM site shows downloads starting with v 4.08 which is for Win95; ...
Summary: I have an IBM Thinkpad A21m, I would like to know if there is anyway to use a SanDIsk CompactFlash PC Card Adapter with a Flash card as a DOS storage ...
Summary: I've a 2 year old laptop from toshiba. I've to install win98. 1) the CD is not bootable 2) the CD ROM is connected using a PC card What can I do?...
Summary: I have recently installed a new 40GB HDD on a Compaq Deskpro 6000. I ran into minor problems installing Win98, but thought I had gotten past them. Ins...
Summary: Help ! I have a compacq 1120t that has been erased I had 3.11 installed and finaly recieved the pc-card cdrom and am ready to put win95 full install o...
Summary: I wanna boot from DOS mode and connect to server by PCMCIA card, does anyone have tried it ? I have the driver for DOS but don't known how to coonfig ...
Summary: I am looking to implement an embedded DOS system with a wireless link to an iPAQ PDA running WinCE. Has anyone ever hooked up a wireless LAN card, eit...
Summary: Well documentation I have says that there are no DOS drivers for eiger pcmcia serial cards.... Here is what 's writtenwith documentation I got with m...
Summary: I don't know if you can help me but I hope so. I need to boot my laptop of a floppy disk and log into my home network. I have a linksys EtherFast 10/1...
Summary: Thanks Steve. Hewlett-Packard told me that the PC Card chip controller set is made by Texas Instruments. Guess I'll check into what thay have to say...
Summary: x86, I had previously read through MadMaxUSB's thread. It's all fine and good for USB but it doesn't help me get FIREWIRE working. The point I wa...
Summary: From what I have read my problem seems to involve what is in the Config.sys and autoexec.bat files, but I just can't seem to get it to work. I have an...
Summary: I'm trying to restore an older Toshiba 650CDT Portege laptop with WIN98 after a disk crash. The problem is I have no CD for the laptop, but I do have...
Summary: i found this amazing site: http://www.bebits.com/app/601 tje page says: About PC Card Wizard: Installing PC Cards (PCMCIA) with ease. PC Card Wizard ...
Summary: I have a 3com 3ccem556 b pc card that I wish to get to my network, via DOS, on a Clevo 660 laptop computer. The laptop has a SystemSoft BIOS, so...
Summary: I have to copy large files from DOS 6.22 to a network share on a Windows NT system over TCP/IP. The file copy is extremely slow from DOS to the mapped...
Summary: I am connecting an AT compatable 386 SX PC card running DOS 6.22 and 4MB ram running a C program I wrote and a WIN 98 laptop via a serial connection. ...
Summary: Mick, you better take another look at that. Either your unzip program works different from mine, or else that disc you made was bootable before you st...
Summary: Yes mr o you can have an External PCMCIA CD-ROM Driver in the same way as a PCMCIA Modem, Network Card or Memory! You need 3 things to make 'PCMCIA Ca...
Summary: Sorry DoomsDay. The comments are not just aimed at you, but a few other little helpers as well. A little more detail helps us all. I take your point a...
Summary: Hi All, Need some help....I have a 6GB Archos MiniHD wnich is connected by PC Card to a toshiba laptop. I need to be able to boot from this, either b...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
