Summary: I want thank all who have helped me get a linux sys running. Also would like to know how to read a linux floppy in a MS Windows sys Thx. Robby ...
Summary: Hey I just installed Tiny Linux on my IBM Thinkpad 355Cs, 486 with 20 megs ram in it. I do not have a way to network this computer with my primary de...
Summary: Can someone tell me where I can get a linux distribution that will run on a diskless pc (run on a floppy), detect most linux-compatible network cards ...
Summary: I have a linux distro which boots from a floppy. i also have the fluxbox install file on my hard drive (windows 98 FAT32 partition). How do I install ...
Summary: Is it possible to boot a mac (in my case a centris 650) with a linux boot floppy or cd, if so, where can i download the files/iso ?? thanks ...
Summary: I'm Workin with Linux and with windows , but the floppy in linux doesn't recodnizes disks that were formatted in windows (dos) , how can I change that...
Summary: Does this make anyone else uneasy : It seems like you can read any unencrypted data on a windows partition just by booting with a linux floppy and ...
Summary: I have 1.44 disks formatted w/ DOS filesystem out-of-the-box. Now an ugly problem shows up when I try fdformat'ing under Linux: reads every second sec...
Summary: My laptop is partitioned with windows xp and linux (rh v. 7.3). The other day i booted into linux and it boots into the gui. the boot process went fin...
Summary: Hi, Windows, especially win9x has a hard time to deal with non-windows partitions. W2k is a bit better. The best way seems for me to use a bootable l...
Summary: Hello, To share the floppy you should put in an entry something like this- but remember the floppy will have to be mounted for it to work- The path ma...
Summary: If all else fails read the directions! Indeed I had to disable Go back. Partition magic worked fine after that. I tried to use boot magic to get to li...
Summary: Two ways After you install windows Boot with a linux floppy type:fdisk /mbr (enter) Or boot with linux and Us the upgrade option. Best is to load lin...
Summary: I've just installed Linux (called Definite Linux) for the very first time, following a nice tutorial. Now I've got win98 on one HDD and Linux on anot...
Summary: Samantha, Boot on the Win 9x floppy and type fdisk/mbr This will automatically put your old master boot record back in your C: . This even put my Powe...
Summary: it's a bit difficult to explain my problem but I'll try to be brief. there is a procedure to let red hat boot using the bootmanager of win2k. However ...
Summary: I'm using the following command as an alias stored in /etc/bashrc. It works fine when I want to format a Linux floppy...all I have to do is type ' pr...
Summary: You now should download an infamous linux floppy. Once booted from floppy, mount the root filesystem, go in and change what you need... Don't forget ...
Summary: hi, one solutions is using boot managers like bootit or paragon software.otherwise use linux floppy disk to boot into linux and cjhange the settings a...
Summary: You can dual boot Linux and Win2k, but the Windows install will overwrite the master boot record, which will wipe out LILO (if that's where you instal...
Summary: do not do what skiff suggested (no offence) This will make w2k boot, but booting off of floppy for lnx is stupid if lilo will work. All that is needed...
Summary: IS it possible to have a dual boot up system in Mandrake 7.0 and Windows 2000? I have my Windows 2000 in Drive C. I have successfully installed my Man...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
