Summary: I have a Linksys WRTP54G router providing wireless access and phone service via Vonage. It's a about four years old and has generally worked well in t...
Summary: I am having connection problems with the ethernet side of the router. One, and only one, device will connect. I currently have a desktop computer, a X...
Summary: I am having connection problems with the ethernet side of the router. One, and only one, device will connect. I currently have a desktop computer, a...
Summary: I recently bought a Linksys WRTP54G VOIP Router and have been having problems with it. I was previously using a Dynex wired router and didn't have a s...
Summary: This is a VOIP router but I am only using the internet connections. Power supply died and was replaced with a like kind. I used Network Magic to set ...
Summary: If I setup the "router" Linksys BEFW11S4 to be at STATIC Internet address for example.. 192.168.40.2 and then set its local LAN address at for example...
Summary: I have one linksys router (BEFW11S4 v4) and it gives internet fine as well as a linksys range expander (WRE54G v3) and a WRT54G v8 router. WRE and WRT...
Summary: I have a Linksys wireless router model BEFW11S4 and I want to check whether someone is accessing the internet through it by setting up a static rout...
Summary: Hi, I have a linksys befsx41 with a fresh new stock firmware. I have created an account at dyndns.com and have successfully updated my router with my ...
Summary: I'm running a small home network on my linksys router. I've got a cable internet connection it's 3 meg down/512 kb up. My connection hasn't been sho...
Summary: I have 2 linksys WRT54G routers. I am trying to extend the range of my coverage. The first router is the gateway 192.168.2.1. It works fine with the d...
Summary: I was wondering if I could get some help on connecting a printer to my network. Here is my network configuration. 1. Local to my PC and Laptop I have...
Summary: Hi, I'm having big trouble sorting out my home network, with connection from an ADSL linksys modem to the internet port of a D-Link DIR-655 Router. I ...
Summary: Hello, I have a house that has thick walls and can not get a good wifi connection on the second floor. There is a single ethernet connection that runs...
Summary: Hello, I am having a Wireless Access Point (Linksys Wireless-G) connected to the modem directly, and I am able to connect to internet but If...
Summary: I am getting ready to go off to college, and I found out that my room does not have wireless in it. I have just bought a wireless printer and that p...
Summary: Hello all, my problem is that the modem i got from globe has an ip of 192.168.1.1 and the linksys router has the same ip. This prevents me from connec...
Summary: Ok it all started today, i lost connecting with the internet and i called linksys. I followed their instructions, and they told me to do a "MAC Addres...
Summary: I have a cable modem connected to a linksys router. I have Room 1 - PC connected LAN to the router. - NAS hooked up to the router. - Mac book conne...
Summary: Windows keeps giving message not installed on bootup with newly installed linksys ver.3 10/100 pcmcia. Have loaded drivers a dozen times done everythi...
Summary: hi, i purchased a Linksys 54G with speed booster PCI card for my desktop. On my dads computer there is a linksys 54G router hooked up, and my brothers...
Summary: I have a Network Everywhere Linksys 4-port router and a Webstar cable modem with comcast cable. I can't seem to get the internet led light to go on n...
Summary: I have a concern with my wireless router. When I first installed it to my DSL connection I didn't enable WEP, but later I realized that the reason my ...
Summary: Hi all folks, I am planning using Linksys 2.4GHz EtherFast Wireless Access Point and Cable/DSL router with 4-port switch (Model BEFW11S4) to connect ...
Summary: The problem: Can Not Connect to PPoE server Cause: SpeedStream Modem by Efficent Networks has problem with 10 Base-T Connection to LinkSys DSL Router...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
