Summary: Here's a pretty picture. What needs to be fixed to get the local LAN dns to work correctly? MY linksys gateway on a ADSL internet doesn't not speci...
Summary: Hi there! I run my Sun(s) with SunOS 5.6 in an NT4 environment An NT 4 Server provides DHCP and DNS services. The Sun is setup as a DHCP and DNS clien...
Summary: May be somebody help me with Solaris 8 and DHCP configuration. I found all instructions on how to do it. I have linksys router and 4 windows machines ...
Summary: I have 4 pc's connected to a netgear router. Each has been assigned a static ip. The routers wan port connects to a cable modem and gets its IP by DHC...
Summary: i am using dhcp and i get an address from server ok, my host name comes back unkown. I can ftp, ping to the internet. I have configured nsswitch.conf ...
Summary: I'm running Solaris 8 with a linksys router acting as my DHCP. I can get the address from the router, but can't resolve the hostnames.. (www.whatever...
Summary: My sparcstation 5 is a dhcp client to a pc running win98 se, via ICS... well kind of. The problem is that the sun can't seem to get dns. Yes, if I t...
Summary: Let me make sure we are on the same page; 1)you have a /etc/hostname.hme0, a /etc/nodename, and a /etc/hosts entry for static ip on sparc5 2)your /etc...
Summary: Hi I have tried sys-unconfig command and gave all the required information.It is automatically created all the necessary files.But now netscapes is gi...
Summary: I have Solaris (Sparc) and no problems to use my Windows 2000 as GateWay. I don't know is this is the question, but I check "DHCP" and use 192.168.0.1...
Summary: I have been trying to get sendmail to work properly on my Sun Fire V100. It won't send out mail externally because it can't resolve host names. I have...
Summary: To set DHCP client for Solaris, follow these steps, as root: 1. touch /etc/dhcp.hme0 replace the ".hme0" with whatever the ethernet interface for yo...
Summary: I am trying to connect my Ultra 30 to the net. I have a PC connected to PacBell DSL, using a LinkSys router (and DSL modem). I like to connect my Ult...
Summary: I have configured Solaris 9 on my virtual PC using DHCP services. The hostname, IP address, default router, etc. is resolved correctly at bootup. Howe...
Summary: Hi, I have a solaris machine behind a linksys router trying to serve to the internet. I currently have the solaris machine declared with a static ip, ...
Summary: 1. Remove the affected interface from /etc/hosts. 2. Remove the affected /etc/hostname.[interface] file. 3. Create an empty file called /etc/hostname....
Summary: To activate the system as dhcp-client create the empty file: /etc/dhcp.YOUR_INTERFACE_NAME To configure dns-setting create the file /etc/resolv.conf ...
Summary: Hi, If you are using T1 line Edit the following files /etc/resolv.conf and put in info like search Domainname nameserver ipaddress (master) nameserver...
Summary: I have a old sun box that I would like to partition and use and a dns server for my network. I am new to solaris so I'm not sure what the best way is ...
Summary: I have the same problem probaly your mach is set for ipvi which there network cant translate that Set the the router for dhcp and then enable dchp on ...
Summary: Hi, I have a question about configure print server. I recently purchase a personal laser printer and I want to hook it up with my Solaris 8 server, bu...
Summary: Hi Folks, I have moved a UltraSPARC-II machine from outside the firewall to inside the firewall. Done the required changes in the hosts,defaultdom...
Summary: Vlad you can check this in manual form, with the command ifconfig for example if you have a eri0 ethernet card, do the next steps ifconfig eri0 plumb ...
Summary: scott; explain what you are trying to do. is this for home network if so you need to edit /etc/resolv.conf and put in nameserver and ip address from ...
Summary: Hey. I've got Solaris 8 and a Linksys WUSB11 and would like to know if there's a driver out there for it or anybody who's gotten it to work at all. O...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
