Summary: The kind of insult that this computer took would take out the PSU but they do have some protection. Sometimes it takes a while for the protection res...
Summary: **Just thought I'd share one of my Lan experiences with you guys. I had a Lan on the weekend with a bunch of my friends. A few of us decided it would ...
Summary: He probably did. I should have saved that response to my hard drive. It might have come in handy later. I think I'll start doing that from now on. ...
Summary: Well this Mobo is MSI KT400 VL and XP1600 and it wont go over 137FSB it will not poast after reboot. Need to go and reset cmos to bootup and then it w...
Summary: Thanks for reading ..Im at my wits end with this lot so ANY help/advice would be great. Ok from the start .... I had a system running a Athlon XP 2800...
Summary: So what you guys are saying, is that there are no setting adjustments in the bios that need to be adjusted... I should be able to just put it in, and ...
Summary: The manual refers to 100 and 133 when it says "different speeds", and this change is accomplished by using a jumper. If you make the jumper change an...
Summary: I currently have a Amd Athlon Xp 2400+ on a Asus a7n8x-x mobo with 768mb pc2100 ddr ram . I tried to oc it, but when I went to exit the bios and save ...
Summary: I cleared my cmos and tried to start it up. The keyboard lights came on, but this weird thing happened. There was a long beep and then silence. Then a...
Summary: The symptoms you describe tell me your proble, is likely a COLD solder joint SOMEWHERE on the mobo. This is a nightmare to fix, even for older electro...
Summary: Definitely install OS first! U need software to run to see if your OC settings r stable and/or to run a benchmark. I have same board (Deluxe ver) and ...
Summary: I just put a machine together. Mobo = gigabyte 7n400 pro2 CPU = AMD 2600 (UNCUT, aka, production line and need to set clock speed manually) 1 gb Cors...
Summary: This is a rare problem. Try removing the RAM, and then placing one Stick at a time, starting up the system, seeing if the PC correctly identifies it,...
Summary: i just got a new mobo recently and its been working very well except i get a bsod every now and then and so i looked around my comp a bit to see if i ...
Summary: Jam, no disrespect I can tell your well known and very helpful on these forums, but you said you were going to leave. You didn't leave, you began trol...
Summary: Don't rip me for moving this post. I would like answers about the RAM slot, PLEASE. For the sake of laughs, I'll elaborate on how to ruin your RAMs....
Summary: Hi i have just bought a brand new pc. Its 1800 mhx Athalon. I went on bios and overlocked it to max 350. Then i saved settings on bios and the compute...
Summary: Ok, well my system specs are as follows, ECS K7S5A Motherboard Athlon XP 1800+ 256 DDR 2100 Radeon 7200 300W PS alright, well I have no post... I took...
Summary: Hi Jam, Thank you for your help - I understand almost everything that you put in your last post and it clarify's my understanding. I am getting rathe...
Summary: I am/was running an asus mobo with an athlon 1.4ghz, two sticks of ddr and xppro. The cpu's heat sink clamp broke one night and the fan fell and frie...
Summary: please help!i have just fitted a new P4 1.4/5 not sure chip and Intel D850gb MOBO and a new power supply into my unit. I have messed up as i only hav...
Summary: OK,guys i have answered many questions on this forum and i have tried to help as many as possoble,now i need some help.I want to upgrade my pc and i m...
Summary: Hi, I've got a MSI KT3 Ultra2 mobo, and a 2000+ for proc. I dunno what happened but when I last turned on my PC it wouldn't boot up -didn't even send ...
Summary: i have a DELL optiplex G1 that i just opened up, it has a pentium 2 running 300 mhz, now, i looked on the mobo, ands there are pins(or brigdes, whihc...
Summary: Hi, I'm trying to configure my new computer. I have ASUS-A7V333 mobo with Athlon XP 2000+ on it and I just installed 512Mb stick of Corsair XMS PC2700...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
