Summary: OK heres the story. I just finished putting my cpu together. everything is plugged in the right areas, and when i go to boot up i get power, and all m...
Summary: I've just finished building my son a new PC. The problem is that it won't run Win 2K (tried NTFS and FAT32). The install runs fine but when you start ...
Summary: Ok i just finished building my computer and everything is working fine, except i think there is a problem with the 3d card. When i installed Counter-S...
Summary: ok soo i just finished building my computer and plugging in all the cables except the LED ones, cuz i lost the manual and cant figure out which goes i...
Summary: Talk about a coinsidence. I just finished building my computer yesterday with a AMD 1800+ and a ASUS A7V333-X motherboard and have much the same probl...
Summary: so i just finished building my computer, plugged all the wires in, made sure everything was connected properly. i went to turn it on for the first tim...
Summary: Hi, I'm just finished building my first system, Here are the specs: AMD Athlon Mobile 2500+ (1800Mhz 14x133) Asus A7N8X-E Deluxe 1GB PC3200 Kingston 1...
Summary: Hi, alright ive been using many programs and im worried about my comps temperature. Ive just finished building my computer and i have some questions.....
Summary: I just finished building my new computer but I have already encountered a problem. When I press the power button, the LED's turn on and the fans begin...
Summary: I just finished building my custom computer and I had re-used the Hard drive from my compaq because I did not want to lose all the Data and now it wil...
Summary: I just finished building my new rig (thanks newegg), and I managed to screw it up somehow already. I had the case open and turned it on to test, got t...
Summary: Hi i have just finished building my new pc. The motherboard is abit AV8 and the power supply is a tagan 480W. the power does not stay on for more than...
Summary: I just finished building my very first computer and I have come across a big problem. First off, I am using an intel d865perl motherboard with a 3.0 g...
Summary: Ok, I just finished building my first comp, and most things have gone smoothly, except this. I run Windows setup, (a reinstallation disk from another ...
Summary: I my rig is pretty freaky. I just finished building my rig and for like the first 3 minutes it runs all fine. But after that it shuts down for no goo...
Summary: Just finished building my new system. The last thing i added is sb audigy 2 zs/ installed the drivers, every went fine. Went into creative diagnostics...
Summary: ok,so i just finished building my NEW comp, and i transplanted my old IDE HD's. i have two s-ata baracudas and wont really need the old ides but i tho...
Summary: I just finished building my new rig...and it wont load...I plug everything in (all the fans, power switch, everything...) and it just wont load...the ...
Summary: I just finished building my comp, and so i partition the hd and format it, install windows, and everythings good. I see that the partition i made was...
Summary: I just finished building my new PC and have one problem I can't figure out. The BIOS is Phoenix Award Workstation 6.00PG (that's what appears at start...
Summary: I just finished building my first system and i'm having trouble formating my 2nd hdd. I currently have windows running on an 80GB hdd which i formate...
Summary: I just finished building my new computer and when I start it up, all the fans start spinning (on video card, PSU, case fan, heatsink, etc), the power ...
Summary: I just finished building my system around an Asus K7V333 motherboard with onboard sound, and I cant get the on-board sound to work. Everything seems ...
Summary: Thanks to these forums and all the info. I just finished building my first PC. Was lots of fun and I am amazed at how easily it went. Was a budgeted g...
Summary: Hi, I just finished building my new computer, but there is one problem, one of the RAM slots on my a8n-sli deluxe is dead, and it happens to be one of...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
