Summary: I was reading forums and came across a program known as "Core Temp". Supposedly, it gives more accurate readings of your cpu temperature than your bio...
Summary: Here's a couple of programs you should try. The 1st is "Core Temp": http://www.thecoolest.zerobrains.co... The 2nd is CPUZ: http://www.cpuid.com/cpuz....
Summary: Greetings everyone, (specs:xp2200+|win xp|dual fan 450watt psu|1 inlett cooler in front 2 outlett coolers in back|ChieftecTX-10WD.) I am wondering ho...
Summary: No overclocking yet. The only thing that is considerably different is my temps. Actually my system is running very very cool.. I am running 28C idl...
Summary: abit and asus motherboards wrongly report temps.....best way i know to get a true temp is a temp probe placed as close to the cpu core as possible wit...
Summary: You have to remember that motherboard sensors located below the chip, are not entirely accurate. To get the raw cpu temperature you need to have a mo...
Summary: 1. Make sure your temps are accurate, my guess is they are. Your processor isn't getting too hot, but you should be able to lower the temp with a hi...
Summary: Actually Gerben the die temp of T-breds and Bartons is 85C. Copper base heatsinks are good when combined with a nice 80mm fan. Since Copper conducts h...
Summary: Your overclocking and running a core voltage of 1.63??? Seems a little low. You said you have a Volacano 7 right?? Well...how fast is it spinning a...
Summary: I have a few issues with temperature readings on my new system. I have just put together this system, E2160 1.8ghz @ 2.8ghz (stock volts) thermaligh...
Summary: i'm using speedfan to measure temps. i noticed that it has several temp readings, but the two i was wondering about was which one is reading my actual...
Summary: Asus probe is not error proof and as jam suggested - update your BIOS to the latest. I would also suggest download "Core Temp" and see what temperatur...
Summary: I'm curious if anyone has some decent data on temps, mine specifically is a 3000+ 939 clocked 2250mhz up from 1800mhz. SySandra reports my cpu core te...
Summary: Just set the vcore to 1.6 and its stable at 3.2ghz from 2.6ghz but the temp is 53c load/idle. is this normal? 3dmark01 - 16340 3dmark03 - 6109 ...
Summary: i Think my temps are accurate seeing as i stuck a digital thermometer in the case for half hour and it read 26 c which is the same as aida32 reports f...
Summary: "i try to set the vcore voltage higher, but the temp looks so scary with my stock fan" The Palomino core runs hot. What temps are you seeing? High 40'...
Summary: Well both temps are accurate within a degree celcius of what they were designed to measure. The 1007-8 bios measures the temp at the temp diode insid...
Summary: Yes, When I boot up the computer, it posts as a pentium 1 chip. Surly it has to be at least 166Mhz, because I managed to install XP in it earlier tod...
Summary: Hello people, I got really worried when my cpu temp. in the bios went over 50 degrees a few days ago... But the fact is that the temp. that you see in...
Summary: what we mean by Core Duo or Core Solo processor. every one has its own views about it. Some says that in Core duo the L2 cache is split into two parts...
Summary: I know this question has been posted a million times but I couldn't find a post with someone with the same specs as me. I have a 1800+ that runs at ab...
Summary: Im using a CoolerMaster Aero 4 HSF and I get about 45c Idle w/ 2.6ghz @ 215 FSB..is this a normal temp? My old mobo w/ stock fan temp used to be about...
Summary: Hello well since i have Oc my rig form 3.2ghz to 3.7ghz stabelry its bin runnign away happily so i check the temps all the time but oen thing i have b...
Summary: I don't have much time...but I believe the Palomino is supposed to run at 1.75v...why would you wanna undervolt to 1.65? You're asking for all kinds o...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
