Summary: i (unwisely) used the format c: , when i restarted i get the 'invalid system disk' error message, which means my hard drive i guess. I know the only w...
Summary: I recently bought a computer online and when I got it, it was reformatted to the original setting because they could not sell me the rights to the ope...
Summary: After I formatted my c:, when I restarted my comp, it goes through the RAM check and that screen that shows your primary IDE and stuff, and then it sa...
Summary: the message "invalid system disk" appears on my screen while booting. there are no disks in any of the drives. this is a second hand computer so i d...
Summary: Re-building a 486 Gateway, powers up & is stuck at the invalid system disk, replace the disk and then press any key.... I have flashed the bios alrea...
Summary: Hi,I have some Pent.166mhz, 1.9gig HD, fat16 just a little history, I have sucessfully installed win.me on some of them.I first ran delpart then fdisk...
Summary: Just built a computer,used a HD I had left over,booted to a flopy start up disk,formated with(/u) command,shoutdown computer.When I started it up agai...
Summary: Just reformatted the hdd of an older Toshiba laptop, and now I cant even get it to a c prompt. I want to install win95, but it wont recognize the cd-...
Summary: HI I have an old p2 350mhz computer running win98. Now every time I start it before it loads windows it says "Invalid system disk, please replace di...
Summary: I reformatted my Satellite Pro 410CS laptop and wiped out the operating system. When I turn it on I get the error message "invalid system disk" "Repl...
Summary: Hi, I am upgrading my P90 system and just got a formatted 2.5Gb WD hdd. I managed to set it up as slave and it was ok. So I copied the DOS system file...
Summary: Calm down...There are several reasons you could get this message. You should check your bios settings to make sure that it can even recognize the dis...
Summary: I accidentally removed the primary partition on my computer. I am trying to re-partition it and install DOS. However, the only disks I have are for my...
Summary: I am upgrading a computer from "upgraded 95" to Win 95 Ver B. I used the dos 6.2 format c: \u and it seemed to format the hard disk fine. When the f...
Summary: I am working off a Toshiba Satellite T1910 486. I'm running DOS 6.22. When I turned on the computer today I received the non-system disk or disk erro...
Summary: i just put a new 12 GB harddrive in my computer, and then formatted it from DOS. it worked fine after that, but now for some reason the second time i ...
Summary: I cannot seem to be able to reinstall XP Pro or any of the DOS based OS's without losing the boot loader that XP uses. I know XP has 4 critical files ...
Summary: I did create another disk, this time the error message says (INVALID SYSTEM DISK REPLACE THE DISK, AND THEN PRESS ENTER) And yes I did use a image pro...
Summary: My old computer's hard drive crashed and had to be replaced. I installed it, but now I can't get it up and running. It says its not partitioned, so ...
Summary: Hi all.....hope you can help. I have formatted my hard disk in DOS OK but when I rebooted it said that I had an invalid system disk inserted. There is...
Summary: I put command.com, io.sys ecc files ,downloaded from the net (bootdisk.com ecc), into a floppy and try to boot my 486 pc with that disk but I get th...
Summary: here's what you wanted: Type ALT+F+X to exit Edit What's New for the Windows 98 Startup Disk? The Startup Disk has changed significantly for Windows 9...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
