Summary: My case is huge but it is very heaty and filled with drives and fans and many lights and such. Is there a way I could transfer my internal hard drives...
Summary: I would like to find out what is the best configuration for the SCSI HDD and IDE HDD coexist in the same system? Please correct me if I am wrong abou...
Summary: Standard stuff - ATX power supplies are always powering ATX mboards in some places even when the computer is not running, as long as the PS is connec...
Summary: Hello, I bought a 200 GB hard drive and an external USB casing for it a few weeks ago. I was just about to partition and format it, when I realised th...
Summary: I build differently... 1st, I test the board outside the case (apparently you had the dealer do this) & run thru all the BIOS settings. I usually disa...
Summary: Hi wanting ideas on the best and safest way to test motherboard outside the case.....im also thinking of not having a case at all cos im always upgrad...
Summary: Hey spark If you get the drive to work at all you will be lucky. You don't want to spend alot of time messing with short cables. Stuart is correct...
Summary: As mentioned, the majority of external hard drives are just standard, internal IDE drives in a case which has a bit of electronics to convert their I/...
Summary: Hello. I just built my new PC. Before I talk about my problem, i'll post my computer specs first: ~~~~~~SYSTEM SPECS~~~~~~ EVERYTHING IS BRAND NEW AND...
Summary: I had three working hard drives before I reinstalled windows (98): (C) 40 gig, (D) 8 gig, and (E) 120 gig. after installation I was left with only one...
Summary: Hi I've been in doubt about this for quite a while so I thought its time I asked someone. Is it dangerous to keep the casing open on a computer? I've...
Summary: HI! I was hoping someone could point me in the right direction to an IDE Gender Changer... or the parts to make one myself. I'm looking to convert an ...
Summary: I want to attempt to recover the data on an IDE HDD of mine that has failed, but I can't get as far as booting WinXP with it plugged in. The PCI IDE...
Summary: It doesn't matter if optical or HD on the board or the card, the pci card will work similar to the ide on board. If you gonna have many hd, why don't ...
Summary: Originally the Pentium 90MHz was used as a desktop during the hey days of Pentium Classics. It came with a 1GB SCSI HDD. Now it's rather redundant giv...
Summary: I had the same problem with my gigabyte MB. XP on Sata and the WD 200GB ide stuck the system. Solution: bios: sata function enabled. sata/raid functi...
Summary: "I only have case fan on side and fan for powersuply" If you are going to have only two fans, that is the best spot for each. You always need a psu e...
Summary: hi all, am running 2 internal ide HDDs. i have a 3rd ide 8gb HDD which sits in a cupboard draw, which i bring out every 2 weeks hooking it up as slave...
Summary: My new system is geared for SATA. Two IDEs are being used by my opticals. But I have two internal IDE HDDS left over from my old system. Any advice on...
Summary: Hi! I have an CDROM here and its connector is IDE, and I want to reformat my other PC which is the HDD is in IDE too. Whenever I connect the CDROM, th...
Summary: Hi, I really need help here because I have run out of Ideas. This is the story so far, sorry about the lenght, but am being very descriptive to make i...
Summary: Hey guys first of all, sorry for the bad english, my 3rd language :), So I installed a new motherboard ( Gigabyte eg41mf-us2h). I have 2 IDE hard dr...
Summary: You only get condensation where there's no current of air to remove the moisture. Water cooling still needs an air current to work properly, that's wh...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
