Summary: Hello everyone, I will be installing Windows 2000 Adv Srv onto an IBM x series 250 server which is configured with an IBM Netfinity serveRaid controll...
Summary: It is possible that you are running a machine with ata 100. W2K did not support ata 100 before SP2. When installing watch for the prompt to hit F6 to ...
Summary: When the set-up gets to the option to hit F6 to install scsi drivers, are you hitting F6 and installing the drivers ? Have you updated your bios?...
Summary: boot from the win2k cd and when it says 'press f6 to install scsi...' press f5 rapidly and then you should get a screen with 3 options. select the sta...
Summary: There are two ways that you can do this you can reistall win2000 and when you before installation it will ask you whether you want to install SCSI dri...
Summary: I got the same error, when I switched motherboards. I then booted from the Win2K boot disks and PRESSED F6 when it asked to install SCSI or RAID devic...
Summary: Thanks for trying to help, but I think I found my own solution!!!!!! This may only work on an ABIT BP6 motherboard, but its up to you to try. Here's...
Summary: First you need to ascertain if you're using SCSI or SATA drives in that machine. If you are, you require drivers which must be added during the insta...
Summary: Hi, Thanks for your reply , I have successfully installed scsi and nic drivers. Now I want to know how to do modem unattended install .Do u know...
Summary: If u've got any scsi h/ware on ur machine,during the installation process press F6 to install scsi drivers.Then carry on with the installation where ...
Summary: I agree wiht hte video driver suggestion. To get the computer to shut down make sure APM/ACPI is enabled in bios and that under control panel -> Power...
Summary: John - I had a similar problem installing 2000 on my KT7 RAID board. I'm not familiar with the K7M, but see if this helps; When 2000 starts to install...
Summary: I have the same problem trying to install scsi adapters in my machine. I have tried 2 - a Tekram dc315u and an Advansys abp930u. Both give the same er...
Summary: First, thanks for the reply. The only drivers that came with the keyboard are Windows drivers that install at the desktop and add enhancements to the ...
Summary: You do, you require the SATA drivers and during a normal install, you put those in when it says "Press F6 to install SCSI drivers". You'll have to do...
Summary: you need to have the promise drivers on a floppy, then at the first blue screen of the win2k setup, you will see a prompt at the bottom to hit F6 to i...
Summary: During the install, when you see a prompt at the bottom of the screen to "Press F6 to install scsi controlers" hit F5. You will be given an option of...
Summary: Never mind guys. I finally figured out what was the problem. When the box rebooted after copiyng w2k files and continued to install it on my syustem, ...
Summary: BTW, you press F5 to install power managment, not F6. F6 installs SCSI drivers. There is beta software at 98lite.net to remove IE from win2k. http:/...
Summary: Copy your ultra 66 drivers to a floppy disk before installing Win2k, during the installation there would be a message at the bottom of the screen (in ...
Summary: Are you loading the promise drivers from a floppy at the beginning of the install? At the first blue screen of the install, at the bottom it says to h...
Summary: Are the drives on a RAID controller or, as shovel204 says, an add-on card? If so, you need to press F6 right at the start of the install procedure (Wh...
Summary: Boot up with the Windows 2000 cd. At the beginning of the bootup you will see a message at the bottom of the screen for about 5 seconds instructing yo...
Summary: If running a PC with an ATA100 you will get that error on reboot unless you have hit the F6 when prompted to install scsi drivers. W2K sees a promise ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
