Summary: Hey, I really need help on this one. I recently swapped my HP's Celeron into my computer and the problem now is that my computer doesn't boot up. Powe...
Summary: Also, did you use a good compound and make sure that the heatsink seated to the cpu firmly??? I hope so cuz usually when your pc won't boot because o...
Summary: Hello to all. I have been having a lot of trouble with a system that I have been working on. Its a Asus A7V133-C, AMD Duron 1.2, 256mb ram.. I was abl...
Summary: Hi. I have a Gateway desktop G6-350 with a 350mhz Pentium II processor and I need to upgrade it to 1ghz. When I put the AMD Athlon 1ghz processor in,...
Summary: Hello all. I recently moved, and after about a month I finally set up my wife's EMachines T6520 again. It was working fine before the move, but my w...
Summary: Hi , I have problem after I install the new heatsink for my Athlon XP 2000. My PC won't start. It goes on for 1-2 secs. Even the new heatsink goes on...
Summary: Did you actually plug in the 3-pin or 4-pin(for LGA775) fan connector into the motherboard where it saids "CPU_FAN"? It could be a problem where you ...
Summary: I recently bought a K7N420 Pro mobo with an AMD XP1900+ CPU. I installed the CPU and the CPU fan, hooked up all the cables, added the RAM, and hooked ...
Summary: Make sure all your settings in the bios for hard drives are set to auto. Make sure you have 3.5 drive "A" enabled and drive "B" disabled. Make sure it...
Summary: Quick question. My p4 2.6 seems to running pretty cool (about 29c idle) so I thought about upping the speed a little. When I o/c as little as 2.8 wind...
Summary: Hi, i write you for a problem that i've met with Asus P5B motherboard. First, i apologies for my english level and my grammar error. This is the probl...
Summary: I replaced my CPU today and now my computer wont boot. I see a solid red HD light. What the deal? Incompatible CPU? Original CPU: P4 HT 3.4ghz New C...
Summary: after transfering everything from my old case to my new Lian Li case and connecting everything, i can't get my PC to power on - i tried to plug the PO...
Summary: i just bougth an xp2000 and put it into my aopen ak77-333 mobo. the mobo won't boot and it sarts to smell badly after liek 5 secs. what's wrong? on te...
Summary: ok.. i just got a new mobo in, its a asrock k7upgrade - 880 (stop laughing it was cheap) now.. reason i got mobo is because i saw my older ide...
Summary: I tried this and you can't change the settings on my BIOS so I did an update...now my computer won't boot up again! I cleared the CMOS again but that...
Summary: That you put the CPU in another known good motherboard and it didn't boot is a fairly definitive test. Maybe you static zapped it when you were cleani...
Summary: Sabertooth, He has the X2 4400+ & it apparently works fine...it's the Opty that won't boot. Correct me if I'm wrong, but seeing as how there's no FSB ...
Summary: It's not your cpu. It seems more like Windows itself. Whenever you move your hard drive onto a another motherboard it's common for it to freeze up if ...
Summary: I've bought a new A-Bit Th7II mobo with a intel P4. Everything is installed properly (so i think) but when i try to boot it hangs after 2sec without s...
Summary: Hello, Here's the specification of my pc: New - AMD Duron 1300 MHz with Thermosonic Cooler fan. New - Abit KD7-E Motherboard. New - Crucial PC2100 DDR...
Summary: I have an Abit IT-7 board, when it won't boot, i have to move a plastic doohickey over from pins 1 and 2 to pins 2 and 3 and wait 60 seconds and makin...
Summary: I went out and got all the necessary parts that we needed to build an Athlon XP system. The only thing is, after I built it, it doesn’t want to boot. ...
Summary: It has power, if the drives are plugged in then the power supply isn't the problem, I had this exact problem because I unlatched the CPU fan, and the ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
