Summary: Floppy disk image files are not "transfered" to a floppy disk, they have to be written to the floppy disk using the image software used to create them...
Summary: ok heres a problem im facing i have got a CD with OS/2 warp4 in it but the problem is it contains only the floppy images of it around 188 file i.e. so...
Summary: I want to know if there is someone who knows how to be able to install OS/2 Warp 4 or eComStation 1.0 from a hard drive? I want to partition the drive...
Summary: Yes it is possible to make and install from floppy disks. Last time I counted, the original Warp required something like 40 floppies for installation....
Summary: I would install from floppies then zip the whole thing up into a backup disc. But why not get Warp3 on CD to begin with? I picked Warp Connect(3 plus ...
Summary: It has been a while since I installed such a card, but one thing that I seem to remember is that during the install it asks for the path of the driver...
Summary: I recently set up Warp Version 3 on an older PC for kicks; I had the PC, the OS/2 software, why not? Unfortunately, I cannot get the 3C509b-TPO NIC in...
Summary: i tried install from floppies; it worked flawlessly on some other boxes. i guess it must be the floppy drive on this one that is making me problems .....
Summary: Never mind my last post, I figured that out. DUH! I need the updated disks to install to a very large hard drive, but the files on the Warp Doctor si...
Summary: Hi All, Can someone please send me a list of files that are on install diskette 1 for OS/2 Ver. 3 Red? I am still having problems installing. When I p...
Summary: There is a utility on the CD that will allow you to recreate the floppy disks so you can install from CD. Below are older messages on the same topic. ...
Summary: i just burn os2 on a cd from my dad laptop to use on my computer but i want to tell guy you could just burn from a downloadable site or kaaza i dont k...
Summary: I think you have a hard disk controller driver problem. New machines require new a new IDE driver. You should download the updated IDE controller dr...
Summary: Look for CDINST.BAT which will make you 3 installation diskettes, to use for OS/2 install from CD. It would also be good to go to the IBM OS/2 Device ...
Summary: I downloaded 3C509x2.exe but cannot figure out how to install it on OS2 3.0 Warp. I extracted the file under /OS2/3com and ran INSTALL.exe but that ju...
Summary: During W2K installation BM (if exists) is marked inactive. I tryed some more possibilities like marking W2K partition activ but no vail. W2K allways ...
Summary: Try to get a copy of OS/2 eComStation. Then you don't needs installation floppies. It has an bootable CD-ROM. An other option is to do a remote instal...
Summary: I've never installed ver. 3, only ver. 4. Maybe my comments will apply ... or maybe not. It could be your problem isn't the CD but the size of your ...
Summary: Hi guys. I have this problem: I have OS/2 Warp 4 as 1 zip file on my HD.(i downloadad it that way, so i haven`t OS2 install cd)i unpacked it and i mad...
Summary: I'm trying to install OS/2 2.1 on my HP Vectra VL2 4/66. The floppy phase goes off without a hitch. When asked to remove the floppy and reboot, it m...
Summary: Virtual PC didnot suppot 2M disk format.so you only can make the boot disk but the install disk. so if you want to run OS/2 on Virtual PC try boot wit...
Summary: I have a tiny cute 486 SX 25 MHz with 8 megabytes of RAM. I wanted to install OS/2, because dust was covering. I never had an opportunity to try th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
