Summary: Hi all, i was instructed to install WinNT4 Server edition on a new machine, the HW config: P4-3Ghz, Asus P5GL-MX, 2X256MB, and a 80GB SATA HD. the sym...
Summary: Have you tried installing NT server on another machine, just to make sure it is not a problem with the media or maybe the CDRom drive and the media ar...
Summary: I want to install winnt 4.0 on compaq proliant 3000 server having 3 x 4 GB SCSI hard disks with raid 5 controller card. How to install NT 4.0 on it. I...
Summary: I am trying to install the DNS Server on an NT 4.0 Server OS. I am trying to add it through the "Add a Service" under Network Neighborhood and it ask...
Summary: I am having problems (still) with installing nt server 4.0 on a large drive. I know all about the fdisk and sp4 drive, but I am still have problems af...
Summary: When I am installing NT4 Server on my duel boot win98 PC, NT does not get past the OS Loader V4.00 screen. My PC has two seperate HDDs HDD1 - C drive ...
Summary: Hey there.. I'm a long time Windows 95 user but I have recently decided to set up a network at home with my 5 pc's, I've decided to set up NT server o...
Summary: If the Primary partition exceeds 7.8Gig then NT 'may' well fail to boot; this even if you do manage to extend it via PM etc. Details via M$ KB below. ...
Summary: I have a 3 computer home network with two PC's and a laptop. I want to put NT Server on one PC and already have Win 98 on the other. I plan on putti...
Summary: slightly different and perhaps easier and related question: please advise the safest and easiest way to run windows 98 and nt4 on same pc (currently r...
Summary: originally posted on win98 board in error Hi, I have a system (server) with two SCSI drives. At boot up the drives are: SCSI ID:0 Compaq ST15150W Fast...
Summary: Hi, I'm installing WinNT Server on a new IBM NetVista (P3-733) With an Ultra2 LVD SCSI 9.1 IBM HDD connected to an Adaptec AHA-2940U2B SCSI Controller...
Summary: I am also getting a similar error. I am trying to install winnt server on a seagate st51080a drive (its only 1GB) ATA2 and no matter what i have tried...
Summary: I was going to install NT Server on my PC last night, but ran into problems. I formatted the hard drive. Then I made the 3 startup disks. I then pr...
Summary: hi ... i try to install winNT server on my samsug 10GB HDD,with two partition C: 60%, D: 40%. Everything is working fine,creating disk 1,2,3. When it ...
Summary: I have a WinNT Servr with SP6. I have two scsi drives one of which id bootable - contains winNT server OS. I installed a 100Gb IDE drive (partitioned...
Summary: Hi, Anybody can help me out about my problem in installing win nt workstation 4.0 to P4 pc with 120 Gb hdd and P4(505). This is a new PC that had XP o...
Summary: Hi ... Recently, I bought a new hard drive (Maxtor-40GB) and tried to install Windows NT 4.0 server into it (D: drive), and keeping my C: drive runn...
Summary: On setup disk2?? This is the disk that loads the immediate setup files. A few things to check: 1.) Is your HD ok? boot with a dos disk and run sca...
Summary: Hi can you help me ? I have a windows 98 machine and I'm trying to install a copy of Windows NT server 4.0. I'm doing this so I can use some hot 3D so...
Summary: I need a hand here. I'm trying to install Windows NT 4.0 Server on my PC. My PC Spesification is Pentium III 850 MHz RAM 512 MB Harddisk 35 GB Seagate...
Summary: Does anybody no anything about the integrated PC SERVER card in the AS400 mainframes. I am having a problem with Service Pack 4 installation on a Winn...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
