Summary: How do I install OS 10.4 on Power Mac G3 the hard drive I put in has been erased to zeros. I keep getting a folder in the middle of the screen with a ...
Summary: I attempted to swap HDs on my laptop and somehow lost a partition - here's the synopsis: Current HD is 60G, and I bought a new 250G to swap in. I par...
Summary: I installed a new HD, after formatting it seems there were a number of bad sectors that turned up. The HD "may" have been exposed to speakers, cassett...
Summary: I have a IMac Power PC 750 running on OS X 10.3.9 and would like to upgrade to 10.4. The Power PC has a 500 MHz G3 processor. Is this upgrade possib...
Summary: That site downloads the software i was refering to above. Maxblaster. It has a copy function which will copy the old OS to the new HD. best of luck F...
Summary: hi all. Every thing seems to be working fine... but .... my BFG Video Card... 7800GS OC USB 256 must have an alarm on it ? When changing screens in V...
Summary: Sorry about the length of this. This problem has been vexing me for the last week and I'm not sure what else I can try. I recently purchased a new CP...
Summary: Please help me. I want to install a new 60gb HD on my system. I have XP Home installed on the current drive (40gb). I would like to dual-boot 98SE an...
Summary: i recently attempted to zero out the data on my mac os x 10.4 hard drive, which didnt work, then after trying to restart the computer it will no longe...
Summary: Okay... I've tinkered with building computers for about a year now and have successfully built a few... but I don't have much software smarts and have...
Summary: i'll try to make this as simple as possible. what i have: -40G HD currently installed and running winXP home -New 160G HD in box ready to go into my ...
Summary: I am a Pro photographer with a ton of pictures. My primary HD (a 40 gig) was getting full so I installed a second (an 80 gig) just to hold pictures. M...
Summary: I just bought a new HD. My old one was screwed. I hooked in my new drive and then made a startup floppy on my parents comp with the installation cd. I...
Summary: If you will remove the jumpers then it will not detect the hd. Okay, what is the brand of your hd? Another thing, you can't copy the OS into another h...
Summary: Ok, I just built a new computer with a new 120 GB SATA II HD, when I go to install programs it gives me an I/O Error saying the file is bad. Can anyon...
Summary: I'm trying to install a new HD into my Toshiba Satellite 2590CDT. I'm removing a 6.1GB IBM Travelstar and replacing with a 20GB Toshiba HD. When I plu...
Summary: It sounds like you tried to upgrade the operating system. The best bet is to remove the active partition, create a new one and install XP from scratch...
Summary: I just purchased a new samsung 7200rpm 40gig HD. I got it to go in a new system that was using an old 13gig 5400rpm drive. My problem is this: I plugg...
Summary: Hardrive is about to fail(repeatedly finding/replacing bad clusters) so I have to replace it. Rather than reinstalling everything is it possible to in...
Summary: HI! My computer is Etower T2984 My new hard drive sounds bad,beleive to be dying sometime soon. Bought WD hard drive It is installed now as slave, ...
Summary: Thanks for all the replies! What happened was this: my 1st hd, the 120 GB one, started to go bad - it was making a clicking sound when I turned on my ...
Summary: What service pack is installed on your WinXP OS? How did you use Acronis when you have a laptop? I am asking how the new drive was connected? Better ...
Summary: How to install Mac os X 10.5.1 on My PC. I have the configaration sa follows: 1)Processor:intel i7 Extreme 3.93 GHz 2)Ram:24 GB DDR3 1600 GHz 3)HDD:4 ...
Summary: I am about to install a new maxtor hard drive. * Maxtor DiamondMaxPlus D740X, ultra ata/133, 2mb cache, 60 gig, 7200 rpm ***Can I take out my old driv...
Summary: I just got a new sata 250gb hardrive. I have another hardrive that is not a sata, its 180gb and is a maxter. If i install apps under my new hd will it...