Summary: I need help with my 486. And has windows 3.1. Whenever I turn it on, it boots up normaly but when it comes to the initializing sentry file on C. it ju...
Summary: I need help with my laptop. Its a ACERNOTE730 And has windows 3.1. when ever i turn it on it boots up normaly but when it comes to the initializing se...
Summary: Copy of e-mail sent earler - Hope you have copy of CONTROL.EXE by now. However I have had time to think, and this may not be your only problem. Comtro...
Summary: I have windows for workgroups 3.11 and a 3 year old son. Some how windows or the autoexec.bat or config.sys or whatever makes windows load after you ...
Summary: Hi Victor Hayes: If you install Win 95 using windows directory, then expect 95 to remove or create an old file of 3.1. My concern is if you have enoug...
Summary: Hi dc: If you have a sound card & software installed, then I believe that you should have a sound folder in Program Manager. There should be a volume ...
Summary: hi gaby :) click on the link above; it will take you to the soundblaster homepage's driver page. the second file is what you want "called sbbasic.exe"...
Summary: Runonc16.exe, as well as shell16x.dll and others, are all Internet explorer 5 (and possibly 4) installed files..after you install IE windows runs runo...
Summary: sorry, but i'm not sure about the CPU/Ram...as i'm trying to get my girlfriends mother's old AST Bravo NB laptop up and running. never actually seen ...
Summary: A friend of mine has an IBM Thinkpad, model 701 I believe. (It's the one that had the butterfly keypad) He's running Windows 3.1. The one program he c...
Summary: Hi I cannot start up my laptop. umm when i turn it on.it runs scandisk for windows. In between..somewhere around 42% complete it stops and it says ...
Summary: In trying to install a 2nd Hard-Drive I must have messed up something so I undid everything. Now, when I switch on I get the following message: "HDD...
Summary: I'd suggest you simply copy the CD-Rom driver lines from your old files to the new ones. First, run edit.com and then "open" the config.fx file. Look...
Summary: The swap file name is 386spart.par .Try deleting this file from Dos, then launch Windows.Windows will create a new one. Make sure that you have enough...
Summary: Hi, On my Windows 3.11 setup disk the control.exe file was courupted and cannot be used. Right now I'm using the Windows 3.0 control.exe and it does ...
Summary: Hello, this file got deleted from my setup disks some how and now I can not reinstall Windows 3.11. If anyone is running Windows 3.11 (not WFW3.11 or ...
Summary: I've got a 486 running wfw 3.11 with 40 meg ram. I want to delete the swap file. I go to control panel and change virtual memory settings to "none" ...
Summary: I'm using win3.11, and had to replace a dead mouse with an older sticky one. When I tried to access mouse in control panel, to reverse buttons, I ...
Summary: hi, i have an ncr safari 3180 laptop upgraded to wfwg 3.11 and i would like to set it up for networking. but i have a problem - there isn't a network ...
Summary: Hi Keith: Here's another way to see hidden files, go to c:\dosshell & under view (I believe) there's a control to show hidden files in list. Good luc...
Summary: I've got a 286 comp which had a perfectly OK HDD. It works on my 386 and I also noted its config from the CMOS autodetect. When I entered them in the ...
Summary: Zubairi, If computers had better internal diagnostics you could believe what it tells you right away and go buy a new or used (www.ebay.com) I/O contr...
Summary: WHAT ARE YOU SAYING - YOU REPLACED THE "CONTROL.EXE" AND THE FILE DID NOT OPEN. I GOT A COPY OF A CONTROL.EXE FILE ON MY WIN 3.1 OPERATING SYSTEM....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
