Summary: I'm trying like hell to find out the correct initailzation string for my modem (Lucent Win Modem) I've got all the set up done I can boot to BeOS but ...
Summary: I've just installed Windows 2000 on my pc and i don't know how to make my lucent win modem work, the sistem doesn't recognize it! Thanks for your help...
Summary: I can't get my Lucent Win Modem to work in BeOS. I'm pretty sure I had all the IRQs and DMAs and IOs and stuff copied down right - I got all the setti...
Summary: I'm having problems with my modem too - it's a Lucent Win Modem. BeOS doesn't detect it - I've checked all the settings in Windows and used the same o...
Summary: I would suggest a US Robotics, but any external 56K 9-pin or 25-pin Serial should work fine. I had some old Wang (yes that was the name of the modem) ...
Summary: See the wiki.bebits.com page on modemtips. See bebits.com for some updated modem settings. If your hsp is a "hard" modem then you will need to make ...
Summary: Could anybody tell about some PCI modem which is it enough connect in the PC and do it to leave navigating in the BeOS? I ask it because i have a Luc...
Summary: (sorry my english, i'm brazilian!) Well, now i don't know why my modem doesn't work. At frizbe and almost all sites that i have seen says that my mode...
Summary: hey i have a lot of problems with the hardware. well i dont have the drivers. for sound or modem. the modem is external sound internal. if i cant find...
Summary: If it's corrupt, it's corrupt. I bet you used a dial-up connection for the download. Check for CRC errors in your connection. Many modems can give...
Summary: I've had the same problem. My internal NON WIN Modem was PCI and on "COM 5." BeOS kept asking if it was on COM 1 or COM 2. My solution was eventual...
Summary: Because it's a PCI modem, I'm thinking it's probably also a win modem... if thats the case, you're probably out of luck for the time being... but I co...
Summary: I don't believe there is a driver for the Alcatel USB for BeOS. Your best bet is to trade in the Alcatel USB for an ethernet modem and then buy a che...
Summary: I have Dano 5.1 installed and i installed the HCF Modem via devices .. new modem .. serial port3 bone(yard) shows me only the above mentioned triModem...
Summary: Thanks for replying. My modem is detected in the sub category PCI devices in the devices panel,as"Communication Device".Its resource usages are-IRQ 12...
Summary: I just got a 56k external modem best data smart one 56spx and i dont have no ideea haw to use it on beos5. is on port1. i made a custom driver for it....
Summary: Hey Zach, Where can i get the drivers for the V550 Win 98 ver. Have incontrols 98 doesn't do anything except for making win start menu differe...
Summary: Regarding the GeForce MX400 card in BeOS, run the install script under terminal. That should install it ands then you can reboot beos and your card sh...
Summary: sup thanx for the hand. it is a sound blaster 16 creativ is not pci is the older kind the black slots biger look like pci but larger. i have no i deea...
Summary: And it will work even better if you stick to Lucent chip sets, look for the Lucent DSP logo on box. Look for works with Linux, DOS? (& therefore BeOS ...
Summary: actualy winmodems are supported by lots of os's now including linux unix and beos. You will have to find the driver though. Volcano may not be support...
Summary: okay, three or four people have seen my post up there and emailed me and i always seem to take forever to respond, so let me do this here. i've run th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
