Summary: Hi guys.As most of you know ive overclocked my athlon 2000+xp to 2gig.The Vcore is currently at the default 1.6-1.65.I was wondering, if I increase th...
Summary: I am a newbie at over clocking so i thankyou all in advance for any help you may give me. I set fsb freq to 150 in bios and achieved 2.69 out of my 2...
Summary: Yes probably, increase the vCore will give the system enough stability, YOU MIGHT FRIE your CPU, be sure to check your CPU Temp, because increasing vC...
Summary: 1) Prescott 2.8 clocked to over 4 Ghz using air is ??? 2) At 4 Ghz without increasing Vcore ???? Without all the ??? You can use ClockGen and lower FS...
Summary: I got an athlon xp 1700 and i overclocked it to the max and increased vcore .5v to see what would happen and now it doesn't start up. i press power, a...
Summary: How much did you overclock? Even slight overclock with "not so matched" memory will give you a blank screen. Try setting memory ratio to 5:4, or 333 i...
Summary: Hi I have athlon xp 2000+, MSI kt3 ultra2 MB and DDR333 ram but when I set fsb to more than 139 windows xp crashes all the time. Increasing Vcore does...
Summary: Increasing FBS and lowering multiplier is harder on RAM than the CPU. Unless you have problems, leave the RAM voltage alone. generally no you won't bu...
Summary: Okay... I think for heat purposes I have maxed out my 2200 at 2.0G. I'm still running between 47-53C depending on load. Is this safe for the system?...
Summary: Your cooler will keep you from hitting the top oc possible but like jam says its not gonna matter too much. But to find your max, lower the multi to 7...
Summary: 180mhz fsb is a limit that could apply to any board made today. No board is certain to run 200fsb regardless of what they are saying. Until we get a...
Summary: You will need ddr400 ram if you want to overclock i run kingston ddr400 value ram all on a MSI K7N2-L and i can hit 200fsb with my cpu, but take it st...
Summary: Mobo SL75 KAV CPU Duron 800 OS W2K pro VID TNT2 M64 AGP 4 x I have a Duron 800 overclocked to 951mhz handles this ok, wanted to get to 1 gig but any ...
Summary: ok atm im running my barton 2500+ at 217 x 11.5 (2.5ghz)@1.85, although my abit nf7-s undervolts so thats actually 1.8V, i have my kingston hyperX dua...
Summary: yes. Just be willing to use high vcore. Try it with the case cover off first - 1.85v-1.95 vcore might get you there. I would lap that sink also - t...
Summary: Overclocking your P4 2.4B requires a Mobo that supports FSB change, Vcore adjustment, PCI/AGP lock, memory voltage adjusment. Often with Intel P4 a 5...
Summary: I have a MS-6712 MSI MoBo. I am trying to clock my CPU a little higher and the only way I can do it is by an FSB increase. Vcore and the Multiplier...
Summary: I'am again with more info-yes I have PC2700 PCQ,AthloX(TM) XP 2000+,Asus A7V8X-X.(What is a "pencil trick")CPU is running at 1800Mhz (12.5 * 144) CPU ...
Summary: As we all know CPUs are made of thin film of semiconductors and dielectrics. You need apply bias on the film to make the structure work. But film thic...
Summary: 400W Allied, 2 fans, 18A on +12V rail. I increased VCORE to 1.85V and stopped because temp was getting higher than 65C. If the RAM tested over 8 hours...
Summary: Hi there, got a new chip today, 'AXDA1800DLT3C' (0321 date, 1.5v, tbred-b). Now i know these baby's can hit some really high scores with the rig...
Summary: Might be here: http://www.ocforums.com/archive/ also i've been toying with the same idea and i asked a guy that had an asus rig similar to mine that h...
Summary: Hi You need to go into Bios By pressing "Delete" at boot up. This is the Very blue screen with options you will then need to go to the tab which is c...
Summary: Hey guys, I have a FOXCONN WINFAST 6150K8MA with an Athlon 64 3000+ (Venice S939) cpu and 1gb or DDR400 memory I have mangaed to overclock my system...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
