Summary: Within a few days will be assembling a new computer. Contains the following: P4 2.53Ghz/533 (dont know what stepping yet) Supermicro P4SGR Dual SCSI ...
Summary: Hey, Smoeone told me that when you overclock your CPU by uping the FSB it also increases your ram speed so if I am running PC2100 and i overclock th...
Summary: Hi, I have a HP pavilion 7975 2GHZ and a asus P4B-LA. The Asus P4B suppose to be a great motherboard to overclock but I think HP has removed al the ov...
Summary: hey guys, i know this will sound silly, but id basically know how to increase my fsb to get more power from my cpu, i have adequate cooling, thanx ...
Summary: Here's my machine : It's a P4 3.2 (Socket 775), memory of 1024 (2 512 (3200) in dual channel), a Chaintech 6600GT, WD SATA Hard drive (200Go) and a mo...
Summary: well i know if i use a ratio to keep my fsb the same speed but increase my memory speed, my computer is supposed to be faster, but i dont have any way...
Summary: Why do you want to do this? What are your plans once you unlock it? Raising or lowering the setting? Overclocking the CPU itself (i.e. raising the mul...
Summary: Firstly apologies for this thread not being solely on OC issues ...... I have just upgraded my mobo to a Asus A7N8X-E Deluxe to take advantage primari...
Summary: OK, So I still haven't fixed the problem, though I've made some progress (I guess). Flashed the bios, set the FSB/DRAM ratio to 3:3, changed the memor...
Summary: I need to overclock my memory clock, because my FX5200 sucks so bad I want to cry sometimes(my mem clock is all maxed out). I've heard that there is a...
Summary: have a good read through this, hope it's of some help.................................Q. What is DDR, SDR and RDRAM and how do they differ? SDR RAM is...
Summary: hii need someone to give me some sound advice.ive recently OC my p4 1.7 to 1.84. motherboard is msi-6534 with 512mb sdram 133mhz. i went into my bios ...
Summary: i got this board a while back now an i think its great havent had any probs with it ive got my xp1800 running stable as a 2000 for past 2months but i ...
Summary: Has anyone here overclocked a (multiplier-locked) Barton 2500+ on KV7? I'd like to push the FSB from 166 to 200 (I have PC3200 memory), but after I do...
Summary: johnoh - thanks for the help and advice i will try it. As i have been reading more and more i have read that the memory also comes into effect and som...
Summary: I am aware that PCI ratio will change after increasing the FSB. AGP is affected also but then it allows overclocking relatively nice. So my concern ...
Summary: I have an Asus A7A266 motherboard which says it has a FSB of 133/266. I am running an Athlon XP 1800+ (FSB 133) My memory is DDR PC2100 (FSB 133?) I'm...
Summary: i have a inno3d gforce 4 ti, my current agp voltage is 1.5v. if i increase my agp voltage, is it safe for my mobo and video card? gforce4 ti req is ag...
Summary: I have a Gainward TI4200 (4x, old type) graphics card, and it has always been overclocked to its maximum stable state, now I clocked up my FSB to incr...
Summary: I have the exact same processor as you and a similar cpu cooler (specs are in my sig) I have had my 2.4 at 3.0 for 6 months and it hasn't caused my co...
Summary: Just to throw another variable into the fire, I've spent the three hours since my last post fixing the very low scores Aquamark3 gave mu running Me. ...
Summary: thanks for your responses. thanks pgckkwvdzm for the TweakGuides link Jam, i did that. i set my CPU and RAM speed both to 166 MHz and yes Everest repo...
Summary: I am running an Athlon XP 1600+ on a Gigabyte 7ZXE board, Thermaltake Volcano 11+, 256 Megs PC133 SDRAM, Geforce 2 TI Pro 64 DDR and 2 Seagate Barracu...
Summary: Hi, again... look, I've been trying all night to get more speed in my cpu, but the maximun value I get was 3120 ghz (see my specs below) I tryed every...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
