Summary: Hi ! I partitioned my 20 GB Maxtor IDE Hard Disk for 2GB DOS (Primary-FAT 16), 16GB Extended wherein 6GB for Win 98 (Extended-FAT32) and 10GB for NT (...
Summary: Hello, I'm trying to reinstall Windows NT 4.0 on a P133 PC with 64MB RAM. Previous to my last installation, I partitioned the disk (C: 1G and d: 2G). ...
Summary: Been through this before and have solved this problem for many other people. Unfortunatly you will have to start from scratch. The problem is rooted i...
Summary: I have been going through the same process. I did the following to dual boot with 98/NT and Me/NT. (assuming that we are starting with a totally clean...
Summary: NT does not like HD's over 7.8/8Gig - unless you provide the updated ATAPI.EXE which resolves it all. (This also presumes your BIOS can handle larger ...
Summary: The subject of your message is NT Install. But you say: "When trying to test idr (backup exec for sbs 4.5) it gives me the error message...." Maybe ...
Summary: I have a 20G HD. I want to insall windows NT. During nt installation, i tried to install atapi.sys, but it said "... or specified drive controller not...
Summary: I have done 1000's of Nt installs and what you describe isn't making sense. First off all the files on the NT cdrom are in 8.3 format. No long file n...
Summary: Didn't mean to come across heavy... just that so many folks post inadequate info. and wonder why they don't get viable answers that may help out... h...
Summary: Check out Microsoft's numerous download sights for the download: "Microsoft ATAPIsp4". It is derrived from service pack 4 to allow for large IDE hard...
Summary: I removed LINUX from a dual boot machine(LINIX & NT) and installed NT on the master drive. When I boot the system the OSLOADER shows two NT installati...
Summary: I have set up a system to install a dual boot (98/nt) I have done this quite a few times and have never had problems. I have partitioned the drive int...
Summary: I removed LINUX from from a dual boot machine(LINIX & NT) and installed NT on the master drive. When I boot the system the OSLOADER shows two NT ins...
Summary: Critical item (text-book requirment) for dual/multi-boot NT/'9x/even DOS is to have a FAT16 C: system (active primary) partition. This is where all M$...
Summary: Dual-boot '9x/NT requires that the system (active primary) partition be FAT16... If you use a Boot-manager, then that requirement isn't so 'tight...' ...
Summary: I know I've seen alot of similar posts to this, but none of the solutions hvae worked for me yet, so I figured I'd post my exact scenario. I'm on a (p...
Summary: Moin Brian, create a directory 'NTinst' or so on your harddisk, copy your complete NT-installation-CD into this directory, then extract the directory ...
Summary: http://www.windows2000faq.com John Savill's NT FAQ's at http://www.win2000mag.com is as good as any... My preferred way: a smallish C: system FAT16 (a...
Summary: I want to be able to dual boot with NT installed first. I have 2 Hard Drives. the first has NT installed on it. The second is blank. I need to mak...
Summary: I am installing a Dual Partition, I have the paritions set up but NT is still complaning here is the system specs: c:\ = Disk1 (30 meg parition primar...
Summary: You need/use the 3 NT setup floppies to run setup and access the CD; or set the boot sequence to allow CD boot (if bios allows); reset it afterwards t...
Summary: Fat32 and NT do not got together. If you want to use FAT than make sure that the first partition is FAT16, then you can mix and match FAT an NTFS part...
Summary: Hi, I am brand new to NT so any help is appreciated. I have a new 10G Seagate (IDE) drive, and want to install NT 4.0 I have the boot disks and CD. I...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
