Summary: on boot, when "Determining IP information for eth0" it fails, and says the to check cable. The cable is fine, it works on my WinXP System. I'm tryin...
Summary: Well it was set to static, I have a home router, but because of my kids ps2 game, I had to put it back to automatic. dhclient eth0 gives me no access,...
Summary: Hi again... I got to one labtob & one desktop @ my home....and i wanna create small home networking with those PC.my labtob Os are Mandrake 9.0 & ...
Summary: I'd like to surf the web using a cable modem under linux. I have configured netconf and installed dhcp, but i still can't get a connection, i have a 3...
Summary: Hi I installed RH 7.3 on my Dell Inspiron Laptop. The installation went fine and I can start linux. However during the startup I get the error; Brin...
Summary: How do I get my NIC configured properly, I have a Linksys EtherFast series 10/100 LAN card (that according to the box is Linux compatible) I am runnin...
Summary: Greetings All, This is my first posting so I please don't be too tough on me. Issue: I'm having a problem pinging my gateway after moving my Fedora 4...
Summary: Thanks for the assistance. The DHCP service does work since I also have a Win2000 box connected to the xDSL router and it is receiving a valid IP addr...
Summary: I have a linux ox that I would like to setup as a server (for a small private home network). I installed Red Hat 7.2 on it with a commmand line only ...
Summary: I am a student at Texas A&M University, and I went to "Linux Installation Fest" hosted by IBM and had Fedora Core put on my Inspiron 9300 to dual boot...
Summary: Got a problem I can't resolve! I can't connect to a lan with a machine(multi processor?) that had a freebsd. I installed a new master harddisk followe...
Summary: Well, I don't know where to start. I run Fedora Core 4 system. I made a bunch of updates to my system, and a couple days later, I rebooted. When I ...
Summary: Hi there, I have 2 network cards eth0 and eth1. I attached eth0 to my Cable modem and eth1 connected to my another machine and I set it with 192.x.x.x...
Summary: Hi, I've done a few searches on this and read at least 30 posts from this site and others, but it all goes a bit over my head. I've just completed my ...
Summary: Hello, I have been using Redhat 8.0 for a while. I just upgraded to Mandrake 9.2 With RH 8.0, eth0 would give an "ok" but upon log in, it gave me some...
Summary: I've been trying to set up an ethernet connection on my linux box. I'm new to linux and I'm doing something wrong, but I don't know what. This version...
Summary: Hi, I'm fairly new to linux, but have been running FC4 successfully for a while. I have been running updates using yum update, and suddenly have found...
Summary: I have set up my adsl connection and when i sart it this is what happens. [root@trends] /root]# adsl-start ................TIMED OUT [root@trends] /ro...
Summary: Hi, I've loaded Suse 9.0 and have been please with it. It see all my peripherals. My only problem is I have to reset the ip address for eth0 everytime...
Summary: During boot time I get this error Bringing up Interface eth0 : [FAILED] Due to this the boot time is unacceptably long. However the system boots fine ...
Summary: when i also run netcfg and try to acivate eth0 interface under the proto bootp i get Determining Ip information for eth0...... Operation Failed. When ...
Summary: Hey I just recently installed linux on one of my old copmuter, seemed like a fun project. All is well, except I cannot connect to the internet. I've c...
Summary: Hi, there, I installed Linux 7.1 on my computer, each time when I start the computer, other checking list are OK, but "bring up interface eth0 fails"....
Summary: Hi all folks, I just upgrade my workstation box RH7.3 to RH9.0 with the latter's CD. I encountered problem in setup broadband connection. I have 2 (tw...
Summary: Hi All, Can someone advice me that I tried to activate an ethernet device and I got the following message: "Determining IP Information for eth1...fai...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
