Summary: We facing the issue when we exceed the number of IP in used. We set the IP using static IP to client and server. The IP start from 192.168.112.1 until...
Summary: Ok I’m going to try to give as much info as possible and hope someone can help me. I set up an FTP site on a server (Windows 2003) using the IIS M...
Summary: Hi All, Previously I was running simple workgroup environment with 1 file server & 1 Linksys WLAN router w/ dhcp built-in. I have decided to use Win 2...
Summary: You can statically assign the IP address by going into Network properties (ie: right click on My Network Places and choose Properties) and then you go...
Summary: Do you have the server behind a firewall? If so, restrict the incoming traffic for the VPN there, to specific addresses that are allowed to connect v...
Summary: I forgot to mention, you'll have to statically assign your router an IP in the same range as your LAN. Here's an example of how it should look: Router...
Summary: First, you assign it an IP in the range of your subnet. In this case something like 192.168.2.1 (assuming it's not in use). Once you've established ...
Summary: Config ISP Modem D-Link Wireless Router ? Local Network: o IP = 192.168.0.1 o DNS = ISP DNS + 192.168.0.3 (Server IP) o DHCP activate o DNS not activa...
Summary: I have a SBS2K3 server running as well as 2 other terminal servers. Both file servers one running accounting software. I cannot RDP or terminal serv...
Summary: I have 2 Win2K Servers with static ip's. Now I want them to be networked so that they can communicate. How can I achieve this? This is just a peer-to-...
Summary: I always use ris to deploy os. But after ris setup, the ip address of the client will be dhcp. Are there anyway to assign the static ip address to the...
Summary: I volunteer network admin for a combined school and church network. We have installed a SonicWall switch which does the content filtering and virus pr...
Summary: First day on a job and I see a new network printer setup. Instead of assigning a static IP address to the printer, he allows the printer to obtain a D...
Summary: I need my Windows server to access the network by static Ip address how to set that on TCP/IP prorties I have 192.165.110.2 255.255.255.0 192.165.11...
Summary: Hello guys I have an issue, same issue both 2 DL380 G5 - Dual port Embedded NIC Cards. NIC joins point to point and tested with Network too - I go to ...
Summary: Setup: Broadband Business Cable>Cable Modem>Linksys Wireless Router>Primary Domain Server>50 Port Switch>25 Client Win XP Pro Router has the ISP’s S...
Summary: HII have a question,if i am using NAT on a RRAS server and designate one NIC as a public and the other as a private normaly i would have to have a sta...
Summary: Hi to the forum, I have been trying to sort this problem out on and off for 3 years without much luck….hope someone can help me out. I run a windows...
Summary: Hi, I was wondering if anyone could help me with this. I am running a wireless network. The main server/router is running Windows Server 2003. I have ...
Summary: I have Server2003 set up as a print server and have about 30 printers setup locally using Standard TCP/IP ports with a static IP for each printer. Al...
Summary: i have the following network details as below i have a ethernet connection this is DHCP assiged and i want to change to static. how to do it please ne...
Summary: Hi guys, i will detail my problem: We have a multihomed Win2003 server that runs dns,exchange 2003, dhcp, RRAS and AD Our setup is that the internet i...
Summary: I'm having a similar problem - I was assigned a static IP address of 65.60.190.18 I want to set up the Win 2003 server in my SOHO, I have a WRT54G bro...
Summary: I have set up a new 2003 server r 2, with terminal sevices, Sql server and Citrix presentnation server 4.5. My problem is that an IP address (from a C...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
