Summary: We are getting "duplicate ip address" errors on our Netware 5.1 server, saying it has an IP conflict with itself. We just added a new application ...
Summary: Hi, With some smart switches, the IP and MAC will be recorded for a specific port. Altering the RJ45 connection port may cause the switch to scan its...
Summary: Side issue really: the coflict msg gives the mac and IP address of the conflicting device. If the server is conflicting with itself, the reported mac...
Summary: I'm running Windows 3.11 on client32 (ipx- tcp/ip) under Novell Netware. I installed the packet driver for my netcard and the winpkt driver to run Tru...
Summary: We have some Dell machines with Windows XP Pro as Workstations and two are having a conflict with the same IP address so we need to figure out where t...
Summary: If you have an all-IP network with a NetWare 4.11 server on it, then you are probably running IPX only for the DOS clients. If you want these clients...
Summary: I want to run 20 workstations each with an external midi interface that ports to LPT1, IRQ 7 but I think it is conflicting with the NIC. What do I ch...
Summary: Ray, I Have had alot of problems with clients not being able to log on to the server. What i would recommend, is firstly, make sure that the nic is wo...
Summary: Hi Ken, This is the issue: Windows' security is conflicting with Novell's. In the '9x/ME world, a user would primarily logon to NetWare and their sys...
Summary: I have implemented ip gateway with BM 3.0 in a server NW 5.0, i would like that my clients use only the ip gateway when they access to Internet and do...
Summary: In our computer lab, many students have installed a game called Pocket Tanks. It is not very big and practically uses DOS-like graphics. Anyway, the...
Summary: I have a computer. 64 MB, 1G HD, 733Mhz processor(P3). I have windows 98 OS. It was fine until I put the latest version of novell on it. Then, it is n...
Summary: I found that if you remove IP from the system totally, and just use IPX (not just uncheck the IP box, but completely remove it), the file transfer rat...
Summary: The solution to my problem could be anything as it is so vague. I can't get past the Novell login screen. I type my user name and pass and hit ok an...
Summary: I want to be able to message direct thru ip aswell, with the reciever having no chat programs, so someone help that man. I want to know how aswell. ...
Summary: I have had a similar problem - there are a few things to look out for: 1) Groupwise 5.5 (WITHOUT the newest service packs) has a problem where it all...
Summary: sys should be a seperate drive from Vol1. This way OS disk access doesn't conflict with user/program access on Vol1. A 4gig drive should be more the...
Summary: -What device name are there on the CDrom driver ? when you use device name CDROM, novell will not install. Because cdrom conflict with the installatio...
Summary: I assume you are running TCP/IP? Add the following entries to the host file in each computer C:\WINDOWS\system32\drivers\etc\host name_of_computerA ...
Summary: Thank for everyone that replied to my needs. I found the answer and I want to share it with you guys. I moved my NIC card from one of the PCI slots to...
Summary: The problem stems from the fact that Himem.sys in the DOS boot is conflicting with netware's memory manager. Solution: Rem out the himem.sys line in ...
Summary: You probably have an IP problem. Gateway set? DNS servers? Proxy servers? AOL is and AOL connection, it wouldn't have anything to do with the IP. C...
Summary: Try to bind the IP protocol with parameter Gateway on NW4 Ex. bind ip to lanboard1 ad=131.102.1.100 mask=255.255.0.0 GA=131.102.2.100 in this Example ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
