Summary: I just installed Novell Netware 5.1. After entering "Enter the server name". It now asks "Specify the network protocol for each network board. How can...
Summary: I've got a client with an old NetWare 3.12 box. They need to change the IP address, and nobody has any idea how... :-) A link to a step-by-step woul...
Summary: I have a situation where I need to associate a secondary IP address on 1 nic to a specific local ip address on a different nic, both on the same serve...
Summary: I got this Novell Network working with IPX and NetBeui. My FireWall keeps telling me that there is something unknown from the LAN that try to comunica...
Summary: Hi, Like to check with all expert on how to insert new ip address to my novell 4.11 server. Do i use inetcfg? add the line in autoexec.ncf or both? P...
Summary: Sounds like a system process trying to broadcast something, since 255.255.255.255 is a broadcast address, and 0.0.0.0 isn't actually a valid IP addres...
Summary: at the NetWare command prompt: INETCFG From the Internetworking Configuration menu - select Protocols From the Protocol Configuration menu - select TC...
Summary: I am trying to proxy from my home computer to my office computer. I installed proxy master on my office computer and proxy host on my home computer. W...
Summary: Howdy, I am currently upgrading a small public school district's Novell setup. They have 4 4.11 file servers with TCP/IP and NW/IP installed and one ...
Summary: Our company has 30 public IP address, but we can access only 5. We are running a Novell Netware Server and BorderManager fire wall. We cannot even pin...
Summary: We are going to have an ADSL connection to the Internet which means a static IP address needs to be set on our File Server which runs Groupwise Intern...
Summary: Hello, I m new to novell and have setup netware 6 in my lab and installed sp3. Now I want to change the IP address, but when I run the inetcfg comman...
Summary: I just loaded a 5x server using the 50 person liscense disk. Now I am being warned to load the server license. I have two floppys. HOw do I load the s...
Summary: I looking for a way to find my IP address of my Server, believe or not my workstation and server can see each other now. When I do a Config command a...
Summary: hi, I want to know how to change the IP address of the netware 4.11 server knowing that I already made these steps: Load inetcfg, Protocols, TCP/IP , ...
Summary: I have my network subnetted in dhcp. What I want to do is for one of my subnets, I want to turn off dhcp and statically assign ip address to the mach...
Summary: I am fairly new to Novell so forgive my. The client I am using is XP. I am using the nwadmin tool to set up a NDS printer that does not support IPX. I...
Summary: I am in a bit of a quandry. If someone can help me with it, it would be appreciated. I have three Netware 5.1 servers on pure IP (without SLP yet) tha...
Summary: i am having a problem with assigning a gateway ip address to a server i have loaded with netware 411. I am trying to conifgure tcpip on this server so...
Summary: We have 2-12 port Shoreline phone switches and 1-24 port Shoreline phone switch that are run by an NT server located at one site on our network. At a...
Summary: On my school we have a LAN, and I'd like to know how I can find other people's IP-addresses. This is a NW 4.x or 5.x network (forgot to check). Does s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
