Summary: thanks for the responses to my CD and FIFO problems. You all helped.Removing and allowing windows to find my CD worked.Unfortunately i already sent my...
Summary: help please!! i know this mobo neds binning but i will not be beaten on this one. i have reinstalled windows me on a pc chips m571 v7 mobo, flashed th...
Summary: Since January of this year, we have been troubleshooting this error message at bootup: "Operating System Not Found" has been causing the system to ha...
Summary: Hi, i just installed windows ME, and having a problem with the secondary IDE Controller. When i looked under device manager, on the secondary ide con...
Summary: I have Asus A7N8x-E Deluxe mobo with xp3200 Cpu that I want to use single Sata hd and two IDE hd (slaves) when running Windows Me Os.Is it possible? I...
Summary: Hi there, I'm having problem to install my cd-rom drives on winME and MSI 694T pro. I installed the via chipset as instructed, my hdd works fine, but ...
Summary: If i was to attach an INTERNAL CD/DVD drive to my laptop externally with a IDE to PCMCIA (or IDE to USB) adaptor and set the drive to read the audio d...
Summary: My computer has, by itself, "dynamically disabled" both the primary and secondary Bus Master IDE controllers (dual fifo). It worked fine last night, s...
Summary: I tried to install an extra hard drive that already contained information on it, and after I turned my computer on it said that the master boot record...
Summary: I have heard about, you shouldn't install CD-Rom on same IDE with HDD because it will lose performance. So is it a good idea to have zip on same ide ...
Summary: I just hooked up a zip drive to my 2nd IDE connection in my Gateway Pentium III 600 mhz computer. The CMOS recognizes the zip drive and my DVD and CD...
Summary: I bought a PC from Gateway PC's (in Ireleand, probably not a good idea) and my CD Burner keeps on going wrong with buffer underrun errors. When linkin...
Summary: I have yellow exclamation points next to my primary and secondary IDE controllers in my device manager. This is causing my cd rom drives not to work. ...
Summary: The problem that I'm having is that I changed the advanced setup options so I could run a cd as 1st boot device (knoppix v 3.3) and then the hard disk...
Summary: I am running Windows ME on my HP system. Several months back I tried running a CD in my CD-ROM only to discover my CD-ROM no longer worked. Upon fu...
Summary: Hi. I have just opened up my Pc for the first time (you wont beleve me if I told you I was 11!)and installed a CD-RW drive-only to find - to my annoyn...
Summary: I am having a problem with my hard disk controller. My primary and secondary ide controllers do not work. Therefore, I cannot use my CD Player. It ...
Summary: In the BIOS, make sure all IDE devices are set to AUTO. Then check in Device Manager. Click first entry in Hard Disk Controllers, which will be for PC...
Summary: does the primary ide controller on my motherboard have privileged access to my computer?--if i hook my cd-rom drive up to it, and my hard drive to a p...
Summary: I have recently added a ATI Raddeon 64 DDR video card to my system and am planning on using the video features for video editing. Part of the set up ...
Summary: I have an AMD Athlon System on an Asus A7V Motherboard. My harddrive recently crashed, and I had to reinstall everything. The reinstallation of Wind...
Summary: hi everyone, i have a 4.5gig, 10k RPM ultra2 SCSI drive with Symbios 53C896, (22910) controller was built in the board. i don't know why it's slower ...
Summary: My PC has went screwy! This computer has ran fine since 4/12/2004 and 4 days ago screwed up. I left my PC turned on and went to town and it was workin...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
