Summary: One of my computers at work has Windows 3.1. At the dos prompt, I typed in DEFRAG, and it seemed to do the defrag. Then when I went back to the dos ...
Summary: Downloaded a game from the internet on my computer for my grandaughter to use on her old small computer but we can't get it to open on Drive A. I open...
Summary: It really sounds like your hard drive (c:) is either bad or improperly connected. You *could* open it up and make sure that all the circuit cards ...
Summary: Hi jboy, thanks for your reply. How do I tell if it's a IDE drive? I've checked all the connections (don't really know what I'm doing) and there's n...
Summary: I got a Toshiba T1950CT that is running Windows For Workgroups 3.11. My modem is Megahertz XJ1144. I don't know how to get my machine to reconize it. ...
Summary: I have the same problem, my floppy light stays on, but I checked the wiring, and it on right. After the BIOS screen, it won't do anything, DOS won't b...
Summary: I have Win3.1 running the way I want it to, but can't get online with it. I installed a modem, but the dialer doesn't read it. I used the "Terminal"...
Summary: I,m am looking for a good 16 bit fax program for my 386dx runnings 3.1., something like win95's microsoft fax that will work as a printer also. Somet...
Summary: Everytime, I restart my computer is Win95 won't boot b/c it claims HIMEM.SYS is missing, although it is actually there. But when I do a cold boot (tur...
Summary: Yes,I am having some problems trying to install win 3.1... I just installed dos 6.22 without any problems,now when I go to install my windows disk 1,...
Summary: I'm having problems booting Win 3.1, after the BIOS screen it won't do anything, and the floppy disk light stays on. Can't boot to DOS either, Please ...
Summary: When i turn my computer on it boots up goes to the windows screen but doesnt go into windows it just stays there.. its stuck!! I dont have a reboot di...
Summary: Hi, tried to upgrade win 3.1 to win 95 and starts to load 95 for first time computer says missing file IFSHLP.SYS and COMMAND.COM then I get a C> and ...
Summary: i reformatd the hard drive and i reinstalled the windows 3.11 for workgroups but i restarts the computer and it says inconpatterable dos. please can s...
Summary: I downloaded "Callwave Service" and it won't work without a video driver with 256 colors and an 8 bit mode. I don't know where and how to start. I t...
Summary: i'm missing msdos.sys and io.sys, i can't get my computer to start up with dos every time i turn it on i get "disk boot error" any suggestions? ...
Summary: I have an old computer that I stored a little data in, to keep clutter off the new. It has been quite awhile since I used it. Now, I tried to boot i...
Summary: I recently purchsed a USR 14.4 modem for me to use in my rather old Packard Bell Multimedia computer. It's a 486 - 33Mhz and is runnign netscape 3.04...
Summary: I recently purchsed a USR 14.4 modem for me to use in my rather old Packard Bell Multimedia computer. It's a 486 - 33Mhz and is runnign netscape 3.04...
Summary: OK this a rather lengthy post, perhaps a bit imprecise, and it may require many different answers. Thanks in advance for helping me out. OK, basics: m...
Summary: Spec.486DX, 33mhz, 424 mb HDD, 16mb RAM (posted earlier but no useful response so I'm posting again) I bought the following modem: Experience the fast...
Summary: Ok, heres a windows 3.11 problem that I hope someone can fix...... I have TCP/IP installed incase in matters.. If I turn on my computer when it is plu...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
