Summary: I have NT4 installed on a server. When I click on "SHUTDOWN", the system will shutdown, but the power will not turn off. Please, tell me what to do? L...
Summary: the one way i learned how to do it is to first map the server's hard drive. then install the software from your weak workstation - actually sitting at...
Summary: Greetings, I've read some of the posted message on how to change the NT 4.0 registry to enable NT to power down after shutdown. I'm using NT 4 server ...
Summary: found this further down list Name: Bieu Williams Date: March 09, 2000 at 13:35:17 Subject: How to setup a Exchange Server with internet mail? Reply:...
Summary: I have an VPN connection between my office LAN and my home computer. Although I have DSL at home and ISDN at work, transferring files between two comp...
Summary: I am hooking up a Wireless Access point and I am running it on my network with a DHCP server. How can I query the server to find out what the IP of th...
Summary: Hi: I have a large UPS connected to a single NT server. The NT Server shuts off when the UPS power goes critically low. How can I cause OTHER NT serve...
Summary: Hi there, I would like to set up my Windows NT Server (NTS) as a gateway. Now, I already have a NTS which services us as a DHCP Server, File server, c...
Summary: Hopefully anyone else out there able to show me how to change a remote server's date. (I'm holding the administrative right of the network)....
Summary: Hi there, I would like to set up my Windows NT Server as a gateway. Now, configuration on this server PDC are: IP Address = 172.97.10.1, subnet = 255....
Summary: unless you have leased lines to each pc i can't see why you are doing this. the default gateway for the pcs should be how they get out, ie the proxy o...
Summary: i have ton install a vpn on a windows nt 4 server with Adsl (montreal) and a vpn connexion on a notebook to connect on the server from florida, i dont...
Summary: Shutting down the Server Service will in effect shut down the capability of the server sharing it's files w/ any user. It may not be the BEST way but...
Summary: Thanks for the help so far. Marko All the servers that I have run on a static IP address already. Nice idea though :-)Hey you have reminded me of s...
Summary: Nothing special to do on the server except choose your protocol. On the 98, under the network icon in control panel, Click "Add" and from the list ch...
Summary: Does anyone know how to deal with the virtual buttons on and applet from a script file, (.whs)? Specifically, NT's "rasphone.exe" applet. This is...
Summary: Hello All, I Have a Dell INSPIRON 7000 Laptop Running NT4.0 with I/O networks USB driver installed to enable NT USB services. That part works fine. ...
Summary: Hi First time on the list so hope I am in the right place. We run an NT4 server with 50 or so win 95 clients - when I need to close down the server fo...
Summary: Try going to the server and enter the following in Start\Run \\192.168.0.1 Where the ip is the ip address of the workstation. That has worked for me i...
Summary: Had the same issue happen today. Found the .fav file on the local HD and there was PLENTY of space left (600+ MB)and not in read-only mode. But Outloo...
Summary: Thanks Andrew, I was able to disable the display in control pannel, now I need one more in how to dis able the Internet setting so no one can change t...
Summary: thanks for bryguy's advise, but what i need to know is how to remotely set the NTFS permission, NOT the sharing permissions. anyway, thanks. Kenneth ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
