Summary: Hi folks ! Here is the interesting problem I've found... As you know, via NEAT you can map the SYS:\users%Login_Name volume as users home drive automa...
Summary: I have a Novell server running Netware 5.1 and must enlarge the SYS vol as quickly and easily as possible. My only two possible options without purcha...
Summary: In Excel, file open and data updated - save as - then the following error ; 0E 0028:C169CE3 saving to home Dir on Novell Server, save locally no prob...
Summary: Have you unmounted the volume and run vrepair? You should just to make sure the disk is being reported correctly. Not sure why you think you should g...
Summary: Directories with more than 8 characters names on my NW 5 server volume is not being mapped through my Netware login script. However, long file name su...
Summary: I had a major crash on my SCSI disk with the SYS: vol. I Now tried to install Novell on a new HD. When I run INSTALL I get "A read error occured... ov...
Summary: I have a old EISA 486 Novell 3.12 server that has not been backed up for months. The SYS VOL is HD is goign bad and I need to SAVE all teh infor on th...
Summary: What do you mean you tried to restored from tape but no luck? If the data is there on the tape then you can restore it. Is the SYS volume definately n...
Summary: Have Netware 4.11 Support Pack 6 installed on a real Intel mb with Pent200 and 96 meg ram. Single Intel 82557 10/100NIC. Single Adaptec 1542CF SCSI ...
Summary: I would like to create a file index on a volume that recides on another server in the same tree. I have heard that you have to mount a remote volume. ...
Summary: really hope there are someone out there that can help me, since i havr ran out of ideas. I Have an IDE disk (ATA-100 attached to an addon-card) With ...
Summary: Hi. I'm completely new to Novell (v3.12) but would like to see if I can get a Netware server running alongside the NT4 system. Unfortunately I can't...
Summary: I am using netware 3.12. Server went down in thunderstorm. Now on reboot the volume can not be mounted because of the following error message. "Mirror...
Summary: Michael you have made a HUGE mistake. As Nutsky points out if you lose a drive your entire server is gone. No access to anything and you start from ...
Summary: 1.You load long name space on sys vol to enable long file names. Once done you don't have to do it again. 2. Don't know about the all uppercase. Nev...
Summary: I was undering if I could get information on how to just map the users home directory and the networked printer. Do I need to map the SYS vol? Thanks ...
Summary: Nancy, Is this the only server you have? Or do you have more servers (with NDS partitions). What is on the sys-volume? Just the default directories? O...
Summary: Is there anyway in 3.12 to get the volumns to mount faster? I am using a promise IDE raid controller in two servers one 3.12 and one 5.0. the sys volu...
Summary: How big is the sys volume, what do want to do with it?? normally default netware makes sys and prog. However if you ever get corrupted sys vol, this c...
Summary: I don't have much info to go on. Is your server still able to boot? If it is able to boot, go to the console and load this command: DOSFAT.NSS This...
Summary: Sorry if this is a repost my myself, I didn't think the first got sent. I'm completely new to Novell (v3.12) but would like to see if I can get a Netw...
Summary: use Dos boot disk you may need to download then fdisk create 20meg partion and make active. Once you have done this format using the c: /s command to...
Summary: As Nobody stated, execute server.exe w/the -na switch. Once the Server is up, manually mount the sys volume. Post back with the exact error message yo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
