Summary: Hi I have a "hidden partition" OEM install of Win ME. If I replace my motherboard and cpu wiil this OS installation refuse to load? - Some folk say th...
Summary: i heard if i get some new hardware like, a motherboard and cpu i will have to reactivate windows, is that true. Hp Pavillion a1010n Intel Celeron 2.9...
Summary: I attempted to swap HDs on my laptop and somehow lost a partition - here's the synopsis: Current HD is 60G, and I bought a new 250G to swap in. I par...
Summary: "Found new hardware" is an automatic feature, built into Windows. You could try Control Panel - Add Hardware, but if the external hard drive is not b...
Summary: I bought a new mouse yesterday. It is a gigaware (RadioShack Brand) travel mouse. It is supposed to be a UPnP device, but when I plugged it into my US...
Summary: I have PCTEL Platinum modem v92 modem(in control panel) but my modem is old, I just updated the driver to v92 and it works fine. Do I have to buy new ...
Summary: If the hardware on the computer you connect the hard drive to is similar enough, XP will automatically find enough drivers to make it work with that h...
Summary: It depends on what your Grandma's computer has. Minimum system requirements for 2000 are - 133mhz - 128mb or ram; 256mb recommended - 2 gig hard drive...
Summary: my PC is set up in the BIOS to use ACPI/APM in Power Management options, and in Device manager in win98 it always used to just have "ACPI BIOS" - neve...
Summary: There is always new hardware. Once you buy the biggest and best, it becomes outdated with something else. What hardware are you talking about..graphic...
Summary: I need to partition and format a new drive I am adding as slave. Do I have to use a boot floppy with fdisk and format.com on it or can I restart in do...
Summary: Hi there I just got done installing my new video card (club3d hd3870). I made sure I deleted all my old video card drivers and then ran drivercleaner ...
Summary: I built a computer a couple months ago. Its no power house like some of the computers I've seen on this site but its all I need. Its a Soyo SY-7VDA w...
Summary: I'm not sure if I should reinstall windows.. You do. The Windows you have on the HD does not recognize the new hardware and that is why it will not l...
Summary: I’ve recently bought Lenovo N200 laptop with Vista Home Ultimate on it and I would like to move to XP. However, although I read posts on how to inst...
Summary: Windows XP with Service Pack 3. 1.6 gHz, Pentium 4, 1gB of RAM, Compaq computer. 'Install New Hardware' reports this error message whenever opened...
Summary: I need to move my current DC and Exchange wich is running on one hardware to 2 new hardware. After i repaired the old hardware i will add it as an ext...
Summary: Everytime I start Windows XP using my toshiba satellite laptop the "Found New Hardware Wizard" comes up saying it found new UNKNOWN hardware. It cann...
Summary: Hi, I was installing XP and not paying attention to what patitions I was deleteing. I had 2 raid drived that were mirored. Raid was temortaraly conf...
Summary: The images you are creating are for the OS partition only. Because you have a Dell computer you probably have a hidden partition at the front of your ...
Summary: Any of the big computer makers have a special deal with MSoft. By installing the OS to the HD and not providing full installation disks they save a t...
Summary: Some manufacturers use the hidden partition, and in different way. Frequently it just will NOT work if things are not exactly where it is planning to ...
Summary: I believe your assumption is correct about the drive letter problem. I have been thinking of doing the same thing. After much thought on the subject I...
Summary: If you have already replaced the TIME supplied Windows version with your own OEM Windows version, you don't necessarily need to buy another CD. Whethe...
Summary: Did make your Partition Magic rescue disks? If so, you can boot with the floppies and look at how the disk is setup. You are interested in the active...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
