Summary: I have an MSI MoBo and I upgraded my FSB too high! I went into my bios and upgraded FSP to 200 instead of 133, which was the highest speed that is saf...
Summary: you might have kiled the main chip on your motherboard because your board can't handle that much stress, perhaps you learn a lesson on try not to set ...
Summary: OK, I just recently got a computer and need some help to make my system run faster. I got an MSI K7N2G(IGP and MCP) nForce2 mobo with a Tbred XP 2200...
Summary: i think my cpu temps are too high, but i need your opinions: 2.4b P4 @ 2.97 @ stock voltage 1.525 @ 55c load with folding@home do you guys think my t...
Summary: hi, i am new to OC'ing and last night i oc'd my Duron 1.3 Ghz to 1.43 110 x 13. It will freeze if i go over 110 FSB. Would it be of any advantage to d...
Summary: I oc'd my 2800+ to a 3200+@2200mhz. Temps are at 50@55C. I tried it at 2400Mhz. It worked but temps were to high, temps were at 60@67C. I have no extr...
Summary: If you can get POST, try lowering the clock a bit, I've had this problem when I crank my FSB too high, if you can't get post, try resetting the BIOS, ...
Summary: Ok, I wouldn't usually ask this sort of question, but, this is an exception I guess... I have a 1700+ Tbred B oced to 2.0, the core temp is 45C/113F ...
Summary: Hello, I have watercooling and oc'd my AMD XP 2000 and have it running at about 1800mhz and stays at 38C temp. I was thinking about getting the AMD X...
Summary: I am trying to oc my 2800+ My temps are fine, like in the 40s. My cpu becomes unstable however before i hit 174 on my fsb. The only voltage change m...
Summary: Hello My AGP bus is about 90MHz The only way to decrease it i know is to decrease my FSB. But if i decrease my FSB the processor's speed would fall do...
Summary: Hello Please take a look at This screenshot I have Geforce 2 MX400 According to SIS SANDRA my AGP bus speed is too high. It's 89MHz. I looked in user ...
Summary: i set my dram clock a bit too high, and no i get a blank screen and a looonng beep at start up. bugger. i hear you have 'reset jumpers' pls help! ...
Summary: On the ASUS P4S533 there is a little jumper by the CPU that boosts the voltage by 0.2 volts. Even doing that I can not get it beyond 2.4 ghz. I have t...
Summary: configuration: xp2500 MSI K7N2G 512mb ddr PC3200 ti4200 audigy 2 80gb 7200rpm 8mbCache Win XP pro I recently upgraded from xp2400 for $7 and I receive...
Summary: Yep, 54 is WAY TOO HIGH! I also have Athlon XP 2.0GHz (2400+) and recently replaced the stock coolong fan that shipped with the CPU (from AMD). As I d...
Summary: hi guys I was just wondering if my processor was too hot, it's a amd 2600xp. it runs at about 44idle and 50-51 while running games and such. it is sli...
Summary: I have a Gigabyte ga-8ihxp P4 1.8a overclocked to 2.25 (FSB 18*125)using Thermaltake volcano 478 heatsink/fan. When idle it is about 43/44c, but when ...
Summary: Hi all, Just putting together a box for my kids. It's a Chaintech 7KJD, XP1700 CPU, FSB @133/266, 256DDR PC2100 (for now). Upon first boot after XP i...
Summary: Well, I do intend to keep it for sometime, as I run abotu 4 dif boxes, each with different purposes. I have my main p4 2.8 9800 AIW that is my bread ...
Summary: There are several different versions of the 9PJL...which one do you have? You can't blow a CPU by raising the FSB too high...your system will either b...
Summary: Basically what I did was speared the paste all over the core. LoL. Guess i wasn't supposed to do that. I took off all of the paste off of the heatsin...
Summary: Hi all, I was hoping someone could give me some direction on how to I.D. my motherboard, the string is 61-0527-001437-00111111-071595-ALi1621-1162100....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
