Summary: Hey, I recently changed my internal hard drive in my G4 PowerBook as it sounded on the way out - the sound of hard drive wiring tooo it death. Howe...
Summary: So i'll try to make this short. I backed up my laptop onto an external hard drive. The external has 2 partitions hfs and fat32. The hfs is where ...
Summary: i just installed mac os x and when i boot it up i can't see my firewire hard drive. I can go into disk utility and see it in there, but when i go to ...
Summary: Hi. I was using an external hard drive with my mac. Everything has been working fine for the past few months. Just the other day, my computer could...
Summary: I'd be eternally grateful if someone could help me with this. Firstly let me just say I'm a girl, we don't normally do these things or have these kin...
Summary: I have an Acomdata USB External Hard Drive (60 GB/5400rpm). It was working fine until i had a document open from the external hard drive and my com...
Summary: I have a 2nd internal hard drive that stoped mounting on startup. I tried mac fixit but that dosn't see the drive at all. Is there any way I can force...
Summary: I found this at http://www.drivesavers.com/ Here is what I have found (though I'm down to trying the install system without initializing the hard driv...
Summary: Iam assuming that both G4's have firwire hookups, if not this won't work. You will need to go get a firewire to firewire cable. (from a networking or ...
Summary: All was going fine with my powermac until the last reboot, when i got the flashing floppy..it looks as i cant get the drive to mount anymore..the disk...
Summary: The other cable is a temperature sensor that the machine uses to figure out how much/how fast to run the fan. The screw are called torx, you can get ...
Summary: I have a Citi Pcmcia card to Ide adaptor with an evternal HD attached. I can get the hardware to work on 9X but does not know that there is anythin...
Summary: Is there, anywhere, something that will let me mount aN NT hard drive on my Mac G4 450 agp with OS 9.1? I've got to transfer about 19gigs from an NT h...
Summary: I, too, have recently dealt with a dying hard drive. I was lucky in that I was able to back it up RIGHT before the final death occurred. In my case,...
Summary: Remove the IDE ribbon cable from the hard drive and you will see a small screw securing the hard drive mount to the bottom of the case. Just remove th...
Summary: Actually, both hard drives will show up on the desktop after booting if you are running two of them. However, I suspect it would be possible to un...
Summary: I aquired a hard drive from a powermac 8100/100, it is a fujitsu M1606AU, I accidently rearanged the jumpers and now my LC III wont recognize it from ...
Summary: I put a Quantum scsi 500mb hard drive in my Mac Classic II but It wont recognize the hard drive. I'm using the Apple hd sc 7.5.3 utility and i patched...
Summary: i have a imac dv400 g3 and the 10 gig is not enough. i am trying to install a western digital hard drive and it wont see it. i have tried single drive...
Summary: Open Disk Utility, found in your Utilities folder in your Applications folder. See if the drive appears in there. You might be able to select it and ...
Summary: I heard that it is possible to remove the hard drive from an i-book with a cooked logic board and make it into an external drive. How would one go ab...
Summary: Can I install a second hard drive in my beige G3? I'd like to have a larger drive with more capacity for saving files, without removing the original h...
Summary: i am completely new to macs so please excuse my ignorance. How do i format the hard drive on my G3 laptop? step by step would be very handy..Thanks i...
Summary: hi there, Ok...i've bought a 2nd hand iMac - its an 80GB memory- my problem is i can't find my 2nd hard drive so i'm limited to 10GB, but when i go to...
Summary: Hello! What should one do to replace an old hard drive? What kind of hard drive may I install to replace Ultra 66 ATA hard drive in a Power Mac G4 4...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
