Summary: My G4 took a nasty crash. It pretty much froze on me while using IMOVIE and doing movie transfers. It was freezing the last couple of times but just a...
Summary: Try booting from the cd and running disk first aid...if that doesnt work then try norton utilities....and if it still doesnt work try zapping your pra...
Summary: did the flashing complete, or did the machine power off during the update? Did you read the instructions before attempting this? This is usually a 2 s...
Summary: I Have a G3 desktop which DOES NOT boot up Normally. the things that happen are: 1)Most times freezes on startup before or after the smiling MAc face....
Summary: hi i have a performa 5200 i was hoping to sell but on testing it i find it will not wake up from sleeping- screen stays dark and i have to restart th...
Summary: This is a problem that just has me stumped! I have just bought a G4 dual 450. It came with a Jaguar 10.2.4 disk set as the only OS. I still must us...
Summary: My old mac, a Performa 6115CD, will not start up. It always shows an icon in the middle of the screen when I turn it on. I have looked at the icon i...
Summary: I have a powerwave tower (mac clone) and it will not power up (it holds power and then loses it, no boot thought, just a couple of seconds of power). ...
Summary: I have a powerG4 500mhz with 1 gig pc133 ram that will not power up unless I press the reset button near the pram battery. Any ideas about fixing this...
Summary: I was going to atempt to install YeloowDogLinux, I decided not to and could not get out of the menu system so I shut it down. Now the Mac will not bo...
Summary: I have difficulty booting up computer without disconnecting power supply cord and then reseting computer. could it be that the clock battery is to...
Summary: My B&W G3 Rev 2 will not boot up. It either turns on, chimes and shows nothing on the monitor or turns on, chimes, and then freezes at the grey scree...
Summary: Hi, For some reason, my G4 dual 533 will not boot from the OS 9.1 CD when I hold the "c" key, or when I select it as the startup disc. It's been q...
Summary: This means that the Mac cannot find a bootable or valid System Folder on any local drives. You need a bootable floppy or CD-ROM disk, to get the Mac...
Summary: check to see that the adapter for your monitor is set properly. some have dip switches that need to be set. setting to 640 x 480 usually is fine enoug...
Summary: I just recently bought an G5 iMac and went to repair the hard disk on my old G3 ibook, and had to reformat the Hard Drive. I thought this would be ...
Summary: I have had the same problem before. The Icon you see on your screen means the your computer can not find the system folder (start up folder). There...
Summary: Hello all :). I am trying to figure out how to get my employer's Mac PowerPC back up and running. It intermittently starts up fine, but most of the ti...
Summary: I have 0 megabytes on my hard drive. My mac will not boot up because of this. What can I do? -will it boot if I connect an external hard drive? -what ...
Summary: I moved finder by mistake And I tried to move it back. I got a error mesage and my mac restarted. All I get now is a floppy disk icon with a ? mark bl...
Summary: Could you... sort of... explain what it is you're attempting. (It's all a tad vague). OS X will not boot up off an OS 9 CD - only OS 9 will boot up ...
Summary: I have an older blue and white iMac G3 that will not boot.. it chimes, and seems like it is going to load, but never shows anything on the display. ...
Summary: OK - I posted this one out before but I never recieved any responses - and then I thought everyone had forgotten about me - so here it is again - f...
Summary: I have a powermac g4 - m8493 I got this from a friend. He installed Leopard OSX on it but everytime I boot it up, it gets to the login screen and says...
Summary: Had a problem with an Imac running os x.5, tried to run a restore disk, but it will not find the Hdd as a destination, Mac support claims to bring it ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
