Summary: Hi, I'm looking to install DOS 6.21 on a second hard drive. This is not a partition of one drive, I have two drives. On my primary drive I have inst...
Summary: I am trying to find a Hard drive diagnostic program that will run in dos. Not only does it have to discover problems but also fix them if possible. ...
Summary: Hello. I've tried installing a WD Caviar 21200 hard drive (1.2 Meg) on an Asus VX-97 Motherboard with a P166MMX chip on it and 32Meg Ram. Now, the mot...
Summary: I dont know how to copy the files from the disk to the hard drive (i am not DOS friendly). I downloaded a file, unzipped it but now am stuck. Thank yo...
Summary: would it be possible that your hard drive is connected to a controller and not to the mainboard directly? then maybe you'll need a special driver ! I...
Summary: formated my hard drive(6.5 gig) cant re load windows 95 or 98 NTLDR is missing cant boot to dos i guess xp has no dos i need to create a dos boot pa...
Summary: The problem is that the computer with the DOS 3xx version cannot see your computer because Ver. 3.xx could only access about 32 Megabytes, and yo...
Summary: Resently my brother was on my computer. A day later I turned it on and there was an error message,"insert bootable media in the approiate drive" I use...
Summary: I would like to have a setup disk for a 3.5 Gb and a 20 Gb hard drive so I can put them in a computer that I'm working on at this time. I have try to...
Summary: help! I have just formatted my laptop whilst putting win 2000 on it (not enough memory for xp - only 32mb) and it started to format with NTFS and then...
Summary: The situation: the hard drive has been half deleted. I can only access it with a boot disk. I want to format it and install win 95 (the usb version) B...
Summary: I just bought a Toshiba hard drive from the thift store & need to find the h/d parameters. On the drive it says, MK234FCF-I HDD3054 J ZZ01 Serial No....
Summary: ah yes, it is becuase it is NTFS volume. How can i get a boot disk that goes into DOS or anything so i dont need to log in to access files. Im pretty ...
Summary: Go into the bios of your computer and double check to make sure it is set to boot from the hard disk. I'm not sure exactly where you should look as a...
Summary: I tried all the above with no luck. When I tried A:\Fdisk /MBR after 30sec it cam back with " The master boot code has NOT been updated" and returnes ...
Summary: Well DOS 6.22 can not 'see' fat 32 partitions at all so that may be a problem. Also I think there's a 540 (someone correct me if I'm wrong) meg limit...
Summary: I want to have dos 6.22 and windows 98 on different partitions on the same hard drive. If I install dos 6.22 first , won't windows 98 want to ionstall...
Summary: Hi, I just installed linux slackware using "fips program" to partition my hardrive. But i made a mistake when i did it. Now the problem is this: Th...
Summary: additional info - there is nothing at all on the hard drive except the one file command.com - computer boots up fine and can run dos programs. Can I ...
Summary: I am trying to fit a new hard drive i have put the hard drive in and the computer has recognised the new one (i think) i was trying to boot up from th...
Summary: Hello and sorry about my english... I want to know how the hard drives can get so much information acumulate... without making phisicals change to th...
Summary: First check that all the ribbon cables are connected and snug. Then check in the bios that the hard drive is listed. When you get the hard ...
Summary: Sounds to me like you may ahve a real problem.... If you didnt back up your files your OUT...If you have the operating system (i.e. windows, os/2, uni...
Summary: Open the case and find out the manufacturer of the hard drive. Go get a low level format utility from whomever makes it (if it's a Maxtor for example...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
