Summary: That file is part of a W98 Plus application type. Any file that may be corrupt should be replaced, especially Dynamic Link Library files, (not .dill ...
Summary: I recently bought and installed a new 20 gb hd, but when I ran scandisk on it, a bunch of bad sectors were found. I thought it was just a compatibili...
Summary: im so confused!!! i can't find out if my motherboard http://www.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=1004&CATEGORY_TYPE=MB&S...
Summary: I think that I am having a problem with my hard drive. Sometimes is will not boot up. It just says, "operating system not found". I use the bootup ...
Summary: Please help! I'm trying to format my hard drive: - i've used used the fdisk command (properly creating an active partition, following MS instructions)...
Summary: Boot from the floppy and run fdisk. One of the options is to make the partition active. Just for your info ... only the primary partition on the first...
Summary: Hi Mik, I am Gandhi from India... Try the following: 1. Instead of connect ur new hard drive as primary slave, connect as a secondary master. Sometime...
Summary: Please check the BIOS and see if it detects the 60GB drive as a full 60GB capacity drive and then post back. I posted the reply to this question to yo...
Summary: I currently have a 2.1 Gig hard drive on my laptop. I got a new one that is 3.2 Gig. When I start my laptop with the 3.2 Gig HD in, the power lights...
Summary: CaffeineJunkie: By everything, does that mean you scanned for spyware? If not I suggest Spybot Search and Destroy. Have you checked device manager to ...
Summary: I just got a 6.4 GB Quantum Fireball hard drive over the weekend to replace a 4.3 GB Quantum BigFoot hard drive. The problem is now this new hard dri...
Summary: ok. i have a list of problems with, my computer. i have 2 hard drives. 1 is a 2 gb, and the other is a 3.5 gb. i need to know how to set them up. the ...
Summary: Once again I seek out the gracious purveyors of computer knowledge and experience here. Thank you very much for helping us novices. Problem: I am atte...
Summary: I run a PII-266. It orginally had a 6.2G Fujitsu Hard Drive. I have just added a 10G Fujitsu drive. My problem is this. When I perform a restart, rest...
Summary: I have a Quantum 13 Gig hard drive that I was using in my old computer as a "second" hard drive for Linux. The first hard drive was a maxtor 20 gig t...
Summary: Hi, I just installed a new 40 GB hard drive from Western Digital, and it is not being detected. When I first boot up, it says that there is an error i...
Summary: I was wondering if anyone here could help me with my problem. I had bought a new maxtor 40gb diamond max plus hard drive as a second drive for my cou...
Summary: Have you tried "re-stamping" the MBR. I don't see how just moving a system could cause problems with a hard drive (unless it's been dropped in the mov...
Summary: I am having a bit of a time with my father's old hard drive. Win98SE was working horrible (lots of "illegal operation errors" blue screen errors). I v...
Summary: I have a hard disk labeled "MAINFOLDER" and a few days ago we had a bad storm here which caused the electricity to go on and off a few times, well a b...
Summary: I took a 40gb hard drive from this computer and put it into a 2nd pc that I have.. and when I booted up, it said Sec Master HDD Error.. After that, I ...
Summary: According to my previous post, I have tried to hypothesize my hard drive has a problem. The problem is that it does not display the number of GB incor...
Summary: I submitted a post on the 7th and received great replies, thanks. Unfortunately I still have major problems. The BIOS is set to A, then C bootup and t...
Summary: My sister has dumped her PII 266 on my lap to fix for her. The problem is the hard drive had/has bad sectors on it. I have run fdisk but the thing wil...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
