Summary: Thanks "OtheHill" for the reply.Please guide me that after buying the card is there still need to update the BIOS or the card will do all and show the...
Summary: I've using a single hard disk 40G with size capacity which running my windows XP SP2 system. Recently I installed another hard disk 20G with size capa...
Summary: I don't know the hard disk's model. There are no dedault and auto disk detections in BIOS. (My computer was developed in 1991,It uses 386. :-D) I will...
Summary: How to Assign Multiple Hard Disk's in a single drive: I have 3 Hard disk in my computer and each hard disk capacity is 40 GB. I want to merge these 3 ...
Summary: hellox everyone. i know this is a common problem and i have searched online as well as this forum for solutions, as well as asked people i know, but i...
Summary: What do you mean by "connected in parallel with my old 160gb sata hard disk"? Check in the BIOS screen to verify that the SATA controller you are conn...
Summary: Looks typical of the Windows-managed virtual memory with Windows 95 and Windows 98 based OSs. It's probably because Windows is writing and /or readin...
Summary: How can I connect 3 Hard Disks together in one case? For your informations I can connect 2HD.But the 3rd I can't do it!!! Waiting for the friends help...
Summary: dear friends, while i was loading a game, computer stopped and it rebooted. but it doesn't run windows anymore. i can hear a knocking noise from the h...
Summary: Hi guys, i'd appreciate your help. A few days ago my computer started to shut down, displaying blue screens mentioning 'kernel_stack_inpage_errors', '...
Summary: The problem may be that you have the CD and the HD both set the same. But beyond that, the CD should be set up on the Secondary channel as the Master,...
Summary: Hello all, I have Intel mainboard DG33FB, and 160GB SATA Seagate Hard disk drive. The BIOS detects the hard disk but when I try to install Win XP Pro ...
Summary: Hi, How do you have the jumpers on the hard disk set. Which connector on the IDE ribbon cable do you have it connected to. It needs to be on the end ...
Summary: There is something wrong with the IDE Hard Disk detection in BIOS. GO to the Hard Disk identification page in BIOS and do an automatic detection to ma...
Summary: Hello. I got a compaq deskpro 2000 from a friend and the hard disk has capacity of only 1GB. I am planning on adding an new 20GB hard disk but because...
Summary: Hello, seem to be having problems. For some reason I am unable to see my other hard disk (with all my data on it) in my computer. It is set to Primary...
Summary: I tried to install a second hard disk to my PC, The Bios can detect it as a slave drive D: with the correct capacity size, but when I boot up to Win98...
Summary: I have an old WD hard drive thats got a capacity of 512 megs and i keep it around so i can easily boot into dos from it and take it out and boot other...
Summary: Watch the POST screens at start up to see haw the drive is identified there. If the full 80GB then someone partitioned the drive into a 32GB primary ...
Summary: 320 GB is mentioned in the bios, it is intel D 101 GGC motherboard. It is not partitioned hard disk. at the time of taking disk management, only disp...
Summary: I built a PC for myself a couple of years ago. (The Motherboard is P5N32 Sli Plus), I had 2 SATA hard disks. Then I put in another IDE hard disk (Seag...
Summary: I purchased a new hard drive (my old one died). I can see it in the BIOS, but I still get a no fixed disks present message. If I type a c:, I get in...
Summary: I programmed both 'Power Management' in BIOS and Windows to shutdown my monitor after 5 minutes & my hard disk after 10 mins. The monitor turned off....
Summary: I have a 250gb western digital hard drive, in an external enclosure ( basically combo box etc) my system is sony vaio, 1.73 ghz, centrinio, 1 gb ram i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
