Summary: Hi I've a problem: yesterday i formatted my hard disk drive using the format dos command. The computer had Win 95 on with fat 32 but i restarted it i...
Summary: Yes it's possible. The best known software for doing is this Drive Image from Powerquest. http://www.powerquest.com/driveimage/ Unfortunately it's not...
Summary: You can try Quick formatting - format c:/q It suppresses Formats prompts. EXTRACT FROM MS-DOS 6 RESOURCE KIT (Available from http://www.powerload.fs...
Summary: I HAVE A PENTIUM 233 MHZ. WINDOW 95. I HAVE 1 GB.(HARD DISK), I NEED TO INSTALL 20 OR 30 GB., AND COPY ALL MY OLD HARD DISK INFORMATION IN MY NEW HARD...
Summary: I also have a compaq 7232 - tried to upgrade hard disk - found out late that you can't do that ..that you can only slave drive it... question is how ...
Summary: I have a 486 which previously had Linux on it. I want to install DOS, and then Windows 3.1. After installing DOS 6.2, it won't boot up from the hard...
Summary: here's what you wanted: Type ALT+F+X to exit Edit What's New for the Windows 98 Startup Disk? The Startup Disk has changed significantly for Windows 9...
Summary: I am wondering, can hard disk spindown - turning off the drive motors - damage the drives? I've had 2 hard drives crash on me. Both of them, I used a ...
Summary: There are a few questions that need to be answered. 1. Which operating system did you use to format the hard disk? 2. Do you have a system disk for ...
Summary: I recently purchased a new 10 GB hard disk drive. The older drive was only 814 MB. With the new drive I did not get any documentation or software to...
Summary: I was given a Tandy 386 computer. I remember the owners had Windows (probably 3.1 on a 3.5 disk), and there is an internal modem. The original owner...
Summary: Hi When I boot my PC, I'm getting an error of HARD DISK(S) FAIL (80). 1. I'm pretty sure that there is no partition on the disk 2. I'm booting off a W...
Summary: That's a pretty serious error. The hard disk controller doesn't have anything to do with the drive itself, rather it's on the motherboard. Usually the...
Summary: I am tryng to fix an used hard disk Seagate 1,2 Gb and I´m encountering problems on formating.Mesage uneble to read hd.I have tryed to fix it whit Nor...
Summary: my hard disk is broken and now i have to change my hard disk but how can i go in the bios setup to configure my new hard disk? is there a diskette or ...
Summary: I need to reformat my hard disk which, has been infected by the W32/Magistr.B virus. I am wondering whether it is necessary to partition it first. Or ...
Summary: I can't access the hard disk of my computer when I booted from the floppy disk. The commands such as dir,copy does not work. (They work for the A:) ...
Summary: In the FAQ section under "Hardware Management" the following Q&A can be found: "Question: Clearing the hardisk. Answer: Save the file Killhdd.bat to ...
Summary: You say low level is un-necessary, but my Seagate Barracuda ATA III ST302141A drive started giving "Hard disk fail" message at boot-up after about a w...
Summary: Ok, here's what happened: I re-formatted my HD to install Windows ME I pop in my ME bootdisk, it starts up fine, then I tried to install it like norma...
Summary: Got a weird one here I think...one of my students brought a 1 gig Conner that he had Win98 on....wanted to reformat and do something else with...when ...
Summary: Hi, You can remove the System, Hidden, and ReadOnly attributes by Attrib command. For example: ATTRIB -R -H -S IO.SYS to do that you need Attrib.e...
Summary: Hi, I have the old software on 5 1/4 floppy disk, and I am trying to install dos 6.22 on the old mashine, and once I tried to do that it gives me the ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
